sbuild (Debian sbuild) 0.63.1 (31 May 2012) on build02.raspbian.lan
╔══════════════════════════════════════════════════════════════════════════════╗
║ libcoro-perl 6.080-3+rpi1 (armhf) 13 Jul 2012 17:00 ║
╚══════════════════════════════════════════════════════════════════════════════╝
Package: libcoro-perl
Version: 6.080-3+rpi1
Source Version: 6.080-3+rpi1
Distribution: testing
Machine Architecture: armhf
Host Architecture: armhf
Build Architecture: armhf
W: line 7 [testing-armhf-sbuild]: Deprecated key ‘script-config’ used
I: This option will be removed in the future; please update your configuration
I: NOTICE: Log filtering will replace 'build/libcoro-perl-zsmJYj/libcoro-perl-6.080' with '«PKGBUILDDIR»'
I: NOTICE: Log filtering will replace 'build/libcoro-perl-zsmJYj' with '«BUILDDIR»'
I: NOTICE: Log filtering will replace 'var/lib/schroot/mount/testing-armhf-sbuild-36e1635f-1393-462d-be20-9ef666d79a45' with '«CHROOT»'
┌──────────────────────────────────────────────────────────────────────────────┐
│ Update chroot │
└──────────────────────────────────────────────────────────────────────────────┘
Get:1 http://repo.raspbian.lan testing InRelease [9318 B]
Get:2 http://repo.raspbian.lan testing/main Sources [6218 kB]
Get:3 http://repo.raspbian.lan testing/main armhf Packages [7250 kB]
Ign http://repo.raspbian.lan testing/main Translation-en
Fetched 13.5 MB in 41s (321 kB/s)
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Fetch source files │
└──────────────────────────────────────────────────────────────────────────────┘
Check APT
─────────
Checking available source versions...
Download source files with APT
──────────────────────────────
Reading package lists...
Building dependency tree...
Reading state information...
NOTICE: 'libcoro-perl' packaging is maintained in the 'Git' version control system at:
git://git.debian.org/pkg-perl/packages/libcoro-perl.git
Need to get 186 kB of source archives.
Get:1 http://repo.raspbian.lan/raspbian/ testing/main libcoro-perl 6.080-3+rpi1 (dsc) [1297 B]
Get:2 http://repo.raspbian.lan/raspbian/ testing/main libcoro-perl 6.080-3+rpi1 (tar) [178 kB]
Get:3 http://repo.raspbian.lan/raspbian/ testing/main libcoro-perl 6.080-3+rpi1 (diff) [6818 B]
Fetched 186 kB in 0s (2563 kB/s)
Download complete and in download only mode
Check arch
──────────
Merged Build-Depends: build-essential, fakeroot
Filtered Build-Depends: build-essential, fakeroot
dpkg-deb: building package `sbuild-build-depends-core-dummy' in `/«BUILDDIR»/resolver-inynKO/apt_archive/sbuild-build-depends-core-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install core build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
sbuild-build-depends-core-dummy
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 5 not upgraded.
Need to get 0 B/704 B of archives.
After this operation, 0 B of additional disk space will be used.
Selecting previously unselected package sbuild-build-depends-core-dummy.
(Reading database ... 10635 files and directories currently installed.)
Unpacking sbuild-build-depends-core-dummy (from .../sbuild-build-depends-core-dummy.deb) ...
Setting up sbuild-build-depends-core-dummy (0.invalid.0) ...
Merged Build-Depends: libc6-dev | libc-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), perl, debhelper (>= 9.20120312), libguard-perl, libanyevent-perl, libcommon-sense-perl, gcc-4.7
Filtered Build-Depends: libc6-dev, gcc (>= 4:4.4.3), g++ (>= 4:4.4.3), make, dpkg-dev (>= 1.13.5), perl, debhelper (>= 9.20120312), libguard-perl, libanyevent-perl, libcommon-sense-perl, gcc-4.7
dpkg-deb: building package `sbuild-build-depends-libcoro-perl-dummy' in `/«BUILDDIR»/resolver-vkMVkV/apt_archive/sbuild-build-depends-libcoro-perl-dummy.deb'.
OK
Reading package lists...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Install libcoro-perl build dependencies (apt-based resolver) │
└──────────────────────────────────────────────────────────────────────────────┘
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following extra packages will be installed:
bsdmainutils cpp-4.7 debhelper file gcc-4.7 gettext gettext-base groff-base
html2text intltool-debian libanyevent-perl libasprintf0c2
libcommon-sense-perl libcroco3 libffi5 libgettextpo0 libglib2.0-0
libguard-perl libmagic1 libpcre3 libpipeline1 libunistring0 libxml2 man-db
po-debconf
Suggested packages:
wamerican wordlist whois vacation gcc-4.7-locales dh-make
libmudflap0-4.7-dev gcc-4.7-doc libgcc1-dbg libgomp1-dbg libitm1-dbg
libquadmath-dbg libmudflap0-dbg binutils-gold gettext-doc groff
libasync-interrupt-perl libev-perl libevent-perl libglib-perl
libio-async-perl libjson-perl libjson-xs-perl libnet-ssleay-perl libpoe-perl
libtask-weaken-perl perl-tk less www-browser libmail-box-perl
Recommended packages:
curl wget lynx-cur autopoint libglib2.0-data shared-mime-info xml-core
libmail-sendmail-perl
The following NEW packages will be installed:
bsdmainutils cpp-4.7 debhelper file gcc-4.7 gettext gettext-base groff-base
html2text intltool-debian libanyevent-perl libasprintf0c2
libcommon-sense-perl libcroco3 libffi5 libgettextpo0 libglib2.0-0
libguard-perl libmagic1 libpcre3 libpipeline1 libunistring0 libxml2 man-db
po-debconf sbuild-build-depends-libcoro-perl-dummy
0 upgraded, 26 newly installed, 0 to remove and 5 not upgraded.
Need to get 481 kB/20.0 MB of archives.
After this operation, 49.8 MB of additional disk space will be used.
Get:1 http://repo.raspbian.lan/raspbian/ testing/main libanyevent-perl armhf 7.010-1 [441 kB]
Get:2 http://repo.raspbian.lan/raspbian/ testing/main libcommon-sense-perl all 3.6-1 [23.7 kB]
Get:3 http://repo.raspbian.lan/raspbian/ testing/main libguard-perl armhf 1.022-1 [16.5 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 481 kB in 0s (2119 kB/s)
Selecting previously unselected package libpcre3:armhf.
(Reading database ... 10635 files and directories currently installed.)
Unpacking libpcre3:armhf (from .../libpcre3_1%3a8.30-5_armhf.deb) ...
Selecting previously unselected package libpipeline1:armhf.
Unpacking libpipeline1:armhf (from .../libpipeline1_1.2.1-1_armhf.deb) ...
Selecting previously unselected package libasprintf0c2:armhf.
Unpacking libasprintf0c2:armhf (from .../libasprintf0c2_0.18.1.1-9_armhf.deb) ...
Selecting previously unselected package libmagic1:armhf.
Unpacking libmagic1:armhf (from .../libmagic1_5.11-1_armhf.deb) ...
Selecting previously unselected package libxml2:armhf.
Unpacking libxml2:armhf (from .../libxml2_2.8.0+dfsg1-4_armhf.deb) ...
Selecting previously unselected package libffi5:armhf.
Unpacking libffi5:armhf (from .../libffi5_3.0.10-3+b3_armhf.deb) ...
Selecting previously unselected package libglib2.0-0:armhf.
Unpacking libglib2.0-0:armhf (from .../libglib2.0-0_2.32.3-1_armhf.deb) ...
Selecting previously unselected package libcroco3:armhf.
Unpacking libcroco3:armhf (from .../libcroco3_0.6.5-1_armhf.deb) ...
Selecting previously unselected package libunistring0:armhf.
Unpacking libunistring0:armhf (from .../libunistring0_0.9.3-5_armhf.deb) ...
Selecting previously unselected package libgettextpo0:armhf.
Unpacking libgettextpo0:armhf (from .../libgettextpo0_0.18.1.1-9_armhf.deb) ...
Selecting previously unselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_9.0.3_armhf.deb) ...
Selecting previously unselected package groff-base.
Unpacking groff-base (from .../groff-base_1.21-9_armhf.deb) ...
Selecting previously unselected package man-db.
Unpacking man-db (from .../man-db_2.6.2-1_armhf.deb) ...
Selecting previously unselected package file.
Unpacking file (from .../archives/file_5.11-1_armhf.deb) ...
Selecting previously unselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.18.1.1-9_armhf.deb) ...
Selecting previously unselected package cpp-4.7.
Unpacking cpp-4.7 (from .../cpp-4.7_4.7.1-2+rpi1_armhf.deb) ...
Selecting previously unselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-15_armhf.deb) ...
Selecting previously unselected package gettext.
Unpacking gettext (from .../gettext_0.18.1.1-9_armhf.deb) ...
Selecting previously unselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously unselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16+nmu2_all.deb) ...
Selecting previously unselected package debhelper.
Unpacking debhelper (from .../debhelper_9.20120608_all.deb) ...
Selecting previously unselected package gcc-4.7.
Unpacking gcc-4.7 (from .../gcc-4.7_4.7.1-2+rpi1_armhf.deb) ...
Selecting previously unselected package libanyevent-perl.
Unpacking libanyevent-perl (from .../libanyevent-perl_7.010-1_armhf.deb) ...
Selecting previously unselected package libcommon-sense-perl.
Unpacking libcommon-sense-perl (from .../libcommon-sense-perl_3.6-1_all.deb) ...
Selecting previously unselected package libguard-perl.
Unpacking libguard-perl (from .../libguard-perl_1.022-1_armhf.deb) ...
Selecting previously unselected package sbuild-build-depends-libcoro-perl-dummy.
Unpacking sbuild-build-depends-libcoro-perl-dummy (from .../sbuild-build-depends-libcoro-perl-dummy.deb) ...
Setting up libpcre3:armhf (1:8.30-5) ...
Setting up libpipeline1:armhf (1.2.1-1) ...
Setting up libasprintf0c2:armhf (0.18.1.1-9) ...
Setting up libmagic1:armhf (5.11-1) ...
Setting up libxml2:armhf (2.8.0+dfsg1-4) ...
Setting up libffi5:armhf (3.0.10-3+b3) ...
Setting up libglib2.0-0:armhf (2.32.3-1) ...
No schema files found: doing nothing.
Setting up libcroco3:armhf (0.6.5-1) ...
Setting up libunistring0:armhf (0.9.3-5) ...
Setting up libgettextpo0:armhf (0.18.1.1-9) ...
Setting up bsdmainutils (9.0.3) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode.
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode.
Setting up groff-base (1.21-9) ...
Setting up man-db (2.6.2-1) ...
Building database of manual pages ...
Setting up file (5.11-1) ...
Setting up gettext-base (0.18.1.1-9) ...
Setting up cpp-4.7 (4.7.1-2+rpi1) ...
Setting up html2text (1.3.2a-15) ...
Setting up gettext (0.18.1.1-9) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16+nmu2) ...
Setting up debhelper (9.20120608) ...
Setting up gcc-4.7 (4.7.1-2+rpi1) ...
Setting up libanyevent-perl (7.010-1) ...
Setting up libcommon-sense-perl (3.6-1) ...
Setting up libguard-perl (1.022-1) ...
Setting up sbuild-build-depends-libcoro-perl-dummy (0.invalid.0) ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build environment │
└──────────────────────────────────────────────────────────────────────────────┘
Kernel: Linux 3.2.0-2-mx5 armhf (armv7l)
Toolchain package versions: binutils_2.22-6.1 dpkg-dev_1.16.4.3 g++-4.6_4.6.3-8+rpi1 gcc-4.6_4.6.3-8+rpi1 gcc-4.7_4.7.1-2+rpi1 libc6-dev_2.13-33 libstdc++6_4.7.1-2+rpi1 libstdc++6-4.6-dev_4.6.3-8+rpi1 linux-libc-dev_3.2.21-1+rpi1
Package versions: apt_0.9.3+rpi1 base-files_6.9 base-passwd_3.5.26 bash_4.2-2 binutils_2.22-6.1 bsdmainutils_9.0.3 bsdutils_1:2.20.1-5.1 build-essential_11.5+b1 bzip2_1.0.6-3 coreutils_8.13-3.2 cpp_4:4.6.3-7 cpp-4.6_4.6.3-8+rpi1 cpp-4.7_4.7.1-2+rpi1 dash_0.5.7-3 debconf_1.5.44 debfoster_2.7-1.1 debhelper_9.20120608 debian-archive-keyring_2012.3 debianutils_4.3.1 diffutils_1:3.2-6 dpkg_1.16.4.3 dpkg-dev_1.16.4.3 e2fslibs_1.42.4-3 e2fsprogs_1.42.4-3 fakeroot_1.18.4-2 file_5.11-1 findutils_4.4.2-4 g++_4:4.6.3-6 g++-4.6_4.6.3-8+rpi1 gcc_4:4.6.3-7 gcc-4.4-base_4.4.7-1.1+rpi1 gcc-4.5-base_4.5.3-12+rpi1 gcc-4.6_4.6.3-8+rpi1 gcc-4.6-base_4.6.3-8+rpi1 gcc-4.7_4.7.1-2+rpi1 gcc-4.7-base_4.7.1-2+rpi1 gettext_0.18.1.1-9 gettext-base_0.18.1.1-9 gnupg_1.4.12-4 gpgv_1.4.12-4 grep_2.12-2 groff-base_1.21-9 gzip_1.5-1.1 hostname_3.11 html2text_1.3.2a-15 initscripts_2.88dsf-22.1 insserv_1.14.0-3 intltool-debian_0.35.0+20060710.1 libacl1_2.2.51-8 libanyevent-perl_7.010-1 libapt-pkg4.12_0.9.3+rpi1 libasprintf0c2_0.18.1.1-9 libattr1_1:2.4.46-8 libblkid1_2.20.1-5.1 libbz2-1.0_1.0.6-3 libc-bin_2.13-33 libc-dev-bin_2.13-33 libc6_2.13-33 libc6-dev_2.13-33 libclass-isa-perl_0.36-3 libcomerr2_1.42.4-3 libcommon-sense-perl_3.6-1 libcroco3_0.6.5-1 libdb5.1_5.1.29-4 libdpkg-perl_1.16.4.3 libffi5_3.0.10-3+b3 libfile-fcntllock-perl_0.14-2 libgc1c2_1:7.1-8 libgcc1_1:4.7.1-2+rpi1 libgdbm3_1.8.3-11 libgettextpo0_0.18.1.1-9 libglib2.0-0_2.32.3-1 libgmp10_2:5.0.5+dfsg-2 libgomp1_4.7.1-2+rpi1 libguard-perl_1.022-1 liblocale-gettext-perl_1.05-7 liblzma5_5.1.1alpha+20120614-1 libmagic1_5.11-1 libmount1_2.20.1-5.1 libmpc2_0.9-4 libmpfr4_3.1.0-5 libncurses5_5.9-10 libncursesw5_5.9-10 libpam-modules_1.1.3-7.1 libpam-modules-bin_1.1.3-7.1 libpam-runtime_1.1.3-7.1 libpam0g_1.1.3-7.1 libpcre3_1:8.30-5 libpipeline1_1.2.1-1 libreadline6_6.2-8 libselinux1_2.1.9-5 libsemanage-common_2.1.6-6 libsemanage1_2.1.6-6 libsepol1_2.1.4-3 libslang2_2.2.4-10 libss2_1.42.4-3 libstdc++6_4.7.1-2+rpi1 libstdc++6-4.6-dev_4.6.3-8+rpi1 libswitch-perl_2.16-2 libtext-charwidth-perl_0.04-7 libtext-iconv-perl_1.7-5 libtext-wrapi18n-perl_0.06-7 libtimedate-perl_1.2000-1 libtinfo5_5.9-10 libunistring0_0.9.3-5 libusb-0.1-4_2:0.1.12-20 libustr-1.0-1_1.0.4-3 libuuid1_2.20.1-5.1 libxml2_2.8.0+dfsg1-4 linux-libc-dev_3.2.21-1+rpi1 login_1:4.1.5.1-1 lsb-base_4.1+Debian7 make_3.81-8.2 man-db_2.6.2-1 mawk_1.3.3-17 mount_2.20.1-5.1 multiarch-support_2.13-33 ncurses-base_5.9-9 ncurses-bin_5.9-10 passwd_1:4.1.5.1-1 patch_2.6.1-3 perl_5.14.2-12+rpi1 perl-base_5.14.2-12+rpi1 perl-modules_5.14.2-12+rpi1 po-debconf_1.0.16+nmu2 raspbian-archive-keyring_20120528.2 readline-common_6.2-8 sbuild-build-depends-core-dummy_0.invalid.0 sbuild-build-depends-libcoro-perl-dummy_0.invalid.0 sed_4.2.1-10 sensible-utils_0.0.7 sysv-rc_2.88dsf-22.1 sysvinit_2.88dsf-22.1 sysvinit-utils_2.88dsf-22.1 tar_1.26-4 tzdata_2012c-1 ucf_3.0025+nmu3 util-linux_2.20.1-5.1 xz-utils_5.1.1alpha+20120614-1 zlib1g_1:1.2.7.dfsg-13
┌──────────────────────────────────────────────────────────────────────────────┐
│ Build │
└──────────────────────────────────────────────────────────────────────────────┘
Unpack source
─────────────
dpkg-source: warning: extracting unsigned source package (libcoro-perl_6.080-3+rpi1.dsc)
dpkg-source: info: extracting libcoro-perl in libcoro-perl-6.080
dpkg-source: info: unpacking libcoro-perl_6.080.orig.tar.gz
dpkg-source: info: unpacking libcoro-perl_6.080-3+rpi1.debian.tar.gz
dpkg-source: info: applying fix-wrong-path-for-interpreter.patch
dpkg-source: info: applying whatis.patch
dpkg-source: info: applying spelling.patch
dpkg-source: info: applying fix-ftbfs-with-longjmp.patch
Check disc space
────────────────
Sufficient free space for build
User Environment
────────────────
HOME=/sbuild-nonexistent
LOGNAME=buildd
PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin:/usr/games
SCHROOT_ALIAS_NAME=chroot:testing-armhf-sbuild
SCHROOT_CHROOT_NAME=testing-armhf-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=108
SCHROOT_GROUP=buildd
SCHROOT_SESSION_ID=testing-armhf-sbuild-36e1635f-1393-462d-be20-9ef666d79a45
SCHROOT_UID=106
SCHROOT_USER=buildd
SHELL=/bin/sh
TERM=xterm
USER=buildd
dpkg-buildpackage
─────────────────
dpkg-buildpackage: source package libcoro-perl
dpkg-buildpackage: source version 6.080-3+rpi1
dpkg-source --before-build libcoro-perl-6.080
dpkg-buildpackage: host architecture armhf
fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
dh_clean
debian/rules build-arch
dh build-arch
dh_testdir -a
dh_auto_configure -a
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
*** Event not found, not building Event support.
*** EV not found, not building EV support.
Checking if your kit is complete...
Looks good
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has a number of configuration options. Due to its maturity, the
defaults that Coro chooses are usually fine, so you can decide to skip
these questions. Only if something went wrong you should select 'n'
here and manually configure Coro, and, of course, report this to the
maintainer :)
Skip further questions and use defaults (y/n)? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a number of methods to implement coroutines at the C
level. The default chosen is based on your current confguration and is
correct in most cases, but you still can chose between these alternatives:
u The unix 'ucontext.h' functions are relatively new and not implemented
or well-tested in older unices. They allow very fast coroutine creation
and reasonably fast switching. They are, however, usually slower than
the other alternatives due to an extra syscall done by swapcontext. And
while nominally most portable (it's the only POSIX-standardised
interface for coroutines), ucontext functions are, as usual, broken on
most/all BSDs.
s If the ucontext functions are not working or you don't want
to use them for other reasons you can try a workaround using
setjmp/longjmp/sigaltstack (also standard unix functions). Coroutine
creation is rather slow, but switching is very fast (often much faster
than with the ucontext functions). Unfortunately, glibc-2.1 and
below don't even feature a working sigaltstack. You cannot use this
implementation if some other code uses SIGUSR2 or you plan to create
coroutines from an alternative signal stack, as both are being used for
coroutine creation.
a Handcoded assembly. This is the fastest and most compatible method,
with the least side effects, if it works, that is. It has been tested
on GNU/Linux x86 and x86_64 systems and should work on all x86/x86_64
systems using the SVR ELF ABI (it is also reported to be working on
Strawberry Perl for Windows using MinGW). This is the recommended
method on supported platforms. When it doesn't work, use another
method, such as (s)etjmp/longjmp.
l GNU/Linux. Very old GNU/Linux systems (glibc-2.1 and below) need
this hack. Since it is very linux-specific it is also quite fast and
recommended even for newer versions; when it works, that is (currently
x86 and a few others only. If it compiles, it's usually ok). Newer
glibc versions (>= 2.5) stop working with this implementation however.
i IRIX. For some reason, SGI really does not like to follow POSIX (does
that surprise you?), so this workaround might be needed (it's fast),
although [s] and [u] should also work now.
w Microsoft Windows. Try this on Microsoft Windows when using Cygwin or
the MSVC compilers (e.g. ActiveState Perl, but see "a" for Strawberry
Perl), although, as there is no standard on how to do this under
windows, different environments might work differently. Doh.
p Use pthread API. Try to avoid this option, it was only created to
make a point about the programming language shootout. It is unlikely
to work with perls that have windows process emulation enabled ("perl
threads"). It is also likely the slowest method of implementing
coroutines. It might work fine as a last resort, however, as the
pthread API is slightly better tested than ucontext functions for
example. Of course, not on BSDs, who usually have very broken pthread
implementations.
Coro tries hard to come up with a suitable default for most systems,
so pressing return at the prompt usually does the right thing. If you
experience problems (e.g. make test fails) then you should experiment with
this setting.
Use which implementation,
<s>etjmp, <u>ctx, <a>sm, <i>rix, <l>inux, <w>indows or <p>threads? [s] s
Using setjmp/longjmp/sigaltstack implementation
Trying to detect stack growth direction (for TEST_sigaltstack)
You might see some warnings, this should not concern you.
*****************************************************************************
If the testsuite fails PLEASE provide the following information
to Marc Lehmann <schmorp@schmorp.de>: operating system name, version,
architecture name and this string '(skaddr)|(sksize)'. Thanks a lot!
*****************************************************************************
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Per-context stack size factor: Depending on your settings, Coro tries to
share the C stacks is creates as much as possible, but sometimes it needs
to allocate a new one. This setting controls the maximum size that gets
allocated, and should not be set too high, as memory and address space
still is wasted even if it's not fully used. The value entered will be
multiplied by sizeof(long), which is usually 4 on 32-bit systems, and 8 on
64-bit systems.
A setting of 16384 (the default) therefore corresponds to a 64k..128k
stack, which usually is ample space (you might even want to try 8192 or
lower if your program creates many coroutines).
On systems supporting mmap and dynamic memory management, the actual
memory usually gets allocated on demand, but with many large stacks you
can still run out of address space on your typical 32 bit platform (not to
forget the pagetables).
Some perls (mostly threaded ones and perl compiled under linux 2.6) and
some programs (inefficient regexes can use a lot of stack space) may
need much, much more: If Coro segfaults with weird backtraces (e.g. in a
function prologue) or in t/10_bugs.t, you might want to increase this to
65536 or more.
The default should be fine, and can be changed at runtime with
Coro::State::cctx_stacksize.
C stack size factor? [16384] 16384
using a stacksize of 16384 * sizeof(long)
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can optionally put a guard area before each stack segment: When the
stack is too small and the access is not too far outside the stack (i.e.
within the guard area), then the program will safely segfault instead of
running into other data. The cost is some additional overhead with is
usually negligible, and extra use of address space.
The guard area size currently needs to be specified in pages (typical
pagesizes are 4k and 8k). The guard area is only enabled on a few
hardcoded architectures and is ignored on others. The actual preprocessor
expression disables this feature if:
!__i386 && !__x86_64 && !__powerpc && !__m68k
&& !__alpha && !__mips && !__sparc64
The default, as usual, should be just fine.
Number of guard pages (0 disables)? [4] 4
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can tell valgrind about its stacks and so reduce spurious warnings
where valgrind would otherwise complain about possible stack switches.
Enabling this does not incur noticable runtime or memory overhead, but it
requires that you have the <valgrind/valgrind.h> header file available.
Valgrind support is completely optional, so disabling it is the safe
choice.
Enable valgrind support (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use (or even trick) some perl functions into doing what it needs
instead of relying on (some) of its own functions. This might increase
chances that it compiles and works, but it could just as well result in
memory leaks, crashes or silent data corruption. It certainly does result
in slightly slower speed and higher memory consumption, though, so YOU
SHOULD ENABLE THIS OPTION ONLY AS A LAST RESORT.
Prefer perl functions over coro functions (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro can use a simple JIT compiler to compile a part of the thread switch
function at runtime. On perls with windows process emulation (most!),
this results in a 50% speed improvement. On sane perls, the gain is much
less, usually around 5%. If you enable this option, then the JIT will
be enabled, on compatible operating systems and CPUs (currently only
x86/amd64 on certain unix clones). Otherwise, it will be disabled. It
should be safe to leave on - this setting is only here so you can switch
it off in case of problems.
Try to use the JIT compiler, if available? [y] y
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Coro has experimental support for cloning states. This can be used
to implement a scheme-like call/cc. However, this doesn't add to the
expressiveness in general, and is likely perl-version specific (and perl
5.12 deliberately removed support for it). As such, it is disabled by
default. Enable it when you want to play around with it, but note that it
isn't supported, and unlikely ever will be. It exists mainly to prove that
it could be done - if only it were useful for something.
Implement Coro::State->clone method (y/n)? [n] n
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
Writing Makefile for Coro::State
Writing MYMETA.yml
Writing Makefile for Coro
Writing MYMETA.yml
dh_auto_build -a
make[1]: Entering directory `/«PKGBUILDDIR»'
cp Coro/Select.pm blib/lib/Coro/Select.pm
cp Coro/State.pm blib/lib/Coro/State.pm
cp Coro/Debug.pm blib/lib/Coro/Debug.pm
cp Coro/RWLock.pm blib/lib/Coro/RWLock.pm
cp Coro/LWP.pm blib/lib/Coro/LWP.pm
cp Coro/jit-amd64-unix.pl blib/lib/Coro/jit-amd64-unix.pl
cp Coro/jit-x86-unix.pl blib/lib/Coro/jit-x86-unix.pl
cp Coro/Semaphore.pm blib/lib/Coro/Semaphore.pm
cp Coro/Timer.pm blib/lib/Coro/Timer.pm
cp Coro/CoroAPI.h blib/lib/Coro/CoroAPI.h
cp Coro.pm blib/lib/Coro.pm
cp Coro/Signal.pm blib/lib/Coro/Signal.pm
cp Coro/AnyEvent.pm blib/lib/Coro/AnyEvent.pm
cp Coro/BDB.pm blib/lib/Coro/BDB.pm
cp Coro/SemaphoreSet.pm blib/lib/Coro/SemaphoreSet.pm
cp Coro/Util.pm blib/lib/Coro/Util.pm
cp Coro/Storable.pm blib/lib/Coro/Storable.pm
cp Coro/AIO.pm blib/lib/Coro/AIO.pm
cp Coro/Handle.pm blib/lib/Coro/Handle.pm
cp Coro/Specific.pm blib/lib/Coro/Specific.pm
cp Coro/Socket.pm blib/lib/Coro/Socket.pm
cp Coro/Channel.pm blib/lib/Coro/Channel.pm
cp Coro/MakeMaker.pm blib/lib/Coro/MakeMaker.pm
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
Skip ../blib/lib/Coro/jit-amd64-unix.pl (unchanged)
Skip ../blib/lib/Coro/Channel.pm (unchanged)
Skip ../blib/lib/Coro/Util.pm (unchanged)
Skip ../blib/lib/Coro/Specific.pm (unchanged)
Skip ../blib/lib/Coro/BDB.pm (unchanged)
Skip ../blib/lib/Coro/AnyEvent.pm (unchanged)
Skip ../blib/lib/Coro/LWP.pm (unchanged)
Skip ../blib/lib/Coro/SemaphoreSet.pm (unchanged)
Skip ../blib/lib/Coro/Semaphore.pm (unchanged)
Skip ../blib/lib/Coro/MakeMaker.pm (unchanged)
Skip ../blib/lib/Coro/AIO.pm (unchanged)
Skip ../blib/lib/Coro/Timer.pm (unchanged)
Skip ../blib/lib/Coro/Debug.pm (unchanged)
Skip ../blib/lib/Coro/State.pm (unchanged)
Skip ../blib/lib/Coro/Socket.pm (unchanged)
Skip ../blib/lib/Coro/RWLock.pm (unchanged)
Skip ../blib/lib/Coro/Signal.pm (unchanged)
Skip ../blib/lib/Coro/jit-x86-unix.pl (unchanged)
cp Intro.pod ../blib/lib/Coro/Intro.pod
Skip ../blib/lib/Coro/Handle.pm (unchanged)
Skip ../blib/lib/Coro/Select.pm (unchanged)
Skip ../blib/lib/Coro/Storable.pm (unchanged)
/usr/bin/perl /usr/share/perl/5.14.2/ExtUtils/xsubpp -typemap /usr/share/perl/5.14/ExtUtils/typemap -typemap typemap State.xs > State.xsc && mv State.xsc State.c
Warning: Aliases 'is_zombie' and 'is_destroyed' have identical values in State.xs, line 3660
gcc-4.7 -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fstack-protector -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -DVERSION=\"6.08\" -DXS_VERSION=\"6.08\" -fPIC "-I/usr/lib/perl/5.14/CORE" -DHAVE_MMAP -DCORO_SJLJ -D_FORTIFY_SOURCE=0 -DCORO_STACKSIZE=16384 -DCORO_STACKGUARD=4 -DCORO_JIT=1 State.c
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by default]
<command-line>:0:0: note: this is the location of the previous definition
State.xs: In function 'boot_Coro__State':
State.xs:3839:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Running Mkbootstrap for Coro::State ()
chmod 644 State.bs
rm -f ../blib/arch/auto/Coro/State/State.so
gcc-4.7 -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wl,-z,relro -shared -L/usr/local/lib -fstack-protector State.o -o ../blib/arch/auto/Coro/State/State.so \
\
chmod 755 ../blib/arch/auto/Coro/State/State.so
cp State.bs ../blib/arch/auto/Coro/State/State.bs
chmod 644 ../blib/arch/auto/Coro/State/State.bs
Manifying ../blib/man3/Coro::Util.3pm
Manifying ../blib/man3/Coro::Channel.3pm
Manifying ../blib/man3/Coro::Specific.3pm
Manifying ../blib/man3/Coro::BDB.3pm
Manifying ../blib/man3/Coro::LWP.3pm
Manifying ../blib/man3/Coro::AnyEvent.3pm
Manifying ../blib/man3/Coro::SemaphoreSet.3pm
Manifying ../blib/man3/Coro::Semaphore.3pm
Manifying ../blib/man3/Coro::MakeMaker.3pm
Manifying ../blib/man3/Coro::AIO.3pm
Manifying ../blib/man3/Coro::Timer.3pm
Manifying ../blib/man3/Coro::Debug.3pm
Manifying ../blib/man3/Coro::State.3pm
Manifying ../blib/man3/Coro::Socket.3pm
Manifying ../blib/man3/Coro::RWLock.3pm
Manifying ../blib/man3/Coro::Signal.3pm
Manifying ../blib/man3/Coro::Intro.3pm
Manifying ../blib/man3/Coro::Handle.3pm
Manifying ../blib/man3/Coro::Storable.3pm
Manifying ../blib/man3/Coro::Select.3pm
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
Manifying blib/man3/Coro.3pm
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_auto_test -a
make[1]: Entering directory `/«PKGBUILDDIR»'
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_basic.t .......... ok
t/01_process.t ........ ok
t/02_channel.t ........ ok
t/03_channel.t ........ ok
t/04_rwlock.t ......... ok
t/05_specific.t ....... ok
t/06_prio.t ........... ok
t/07_eval.t ........... ok
t/08_join.t ........... ok
t/10_bugs.t ........... ok
t/11_deadlock.t ....... ok
t/12_exit.t ........... ok
t/13_diewarn.t ........ ok
t/14_load.t ........... ok
t/15_semaphore.t ...... ok
t/16_signal.t ......... ok
t/17_rouse.t .......... ok
t/18_winder.t ......... ok
t/19_handle.t ......... ok
t/20_mutual_cancel.t .. ok
All tests successful.
Files=20, Tests=196, 5 wallclock secs ( 0.63 usr 0.13 sys + 3.22 cusr 0.54 csys = 4.52 CPU)
Result: PASS
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
No tests defined for Coro::State extension.
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
make[1]: Leaving directory `/«PKGBUILDDIR»'
fakeroot debian/rules binary-arch
dh binary-arch
dh_testroot -a
dh_prep -a
dh_installdirs -a
dh_auto_install -a
make[1]: Entering directory `/«PKGBUILDDIR»'
make[2]: Entering directory `/«PKGBUILDDIR»/Coro'
make[2]: Leaving directory `/«PKGBUILDDIR»/Coro'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/State/State.so
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/auto/Coro/State/State.bs
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/AnyEvent.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Semaphore.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/LWP.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/State.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Socket.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/MakeMaker.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Handle.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/AIO.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/jit-amd64-unix.pl
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Storable.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Timer.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Select.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/jit-x86-unix.pl
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/CoroAPI.h
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Intro.pod
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Util.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/BDB.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Signal.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Channel.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/RWLock.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Specific.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/Debug.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/lib/perl5/Coro/SemaphoreSet.pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Handle.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Util.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::BDB.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Specific.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Signal.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Timer.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Semaphore.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::AIO.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Select.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::LWP.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::SemaphoreSet.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Channel.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::MakeMaker.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::RWLock.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Intro.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::AnyEvent.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Debug.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Socket.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::State.3pm
Installing /«PKGBUILDDIR»/debian/libcoro-perl/usr/share/man/man3/Coro::Storable.3pm
make[1]: Leaving directory `/«PKGBUILDDIR»'
dh_install -a
dh_installdocs -a
dh_installchangelogs -a
dh_installexamples -a
dh_installman -a
dh_installcatalogs -a
dh_installcron -a
dh_installdebconf -a
dh_installemacsen -a
dh_installifupdown -a
dh_installinfo -a
dh_installinit -a
dh_installmenu -a
dh_installmime -a
dh_installmodules -a
dh_installlogcheck -a
dh_installlogrotate -a
dh_installpam -a
dh_installppp -a
dh_installudev -a
dh_installwm -a
dh_installxfonts -a
dh_installgsettings -a
dh_bugfiles -a
dh_ucf -a
dh_lintian -a
dh_gconf -a
dh_icons -a
dh_perl -a
dh_usrlocal -a
dh_link -a
dh_compress -a
dh_fixperms -a
dh_strip -a
dh_makeshlibs -a
dh_shlibdeps -a
dh_installdeb -a
dh_gencontrol -a
dh_md5sums -a
dh_builddeb -a
dpkg-deb: building package `libcoro-perl' in `../libcoro-perl_6.080-3+rpi1_armhf.deb'.
dpkg-genchanges -B -mbuildd >../libcoro-perl_6.080-3+rpi1_armhf.changes
dpkg-genchanges: arch-specific upload - not including arch-independent packages
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build libcoro-perl-6.080
dpkg-buildpackage: binary only upload (no source included)
────────────────────────────────────────────────────────────────────────────────
Build finished at 20120713-1704
Finished
────────
I: Built successfully
┌──────────────────────────────────────────────────────────────────────────────┐
│ Changes │
└──────────────────────────────────────────────────────────────────────────────┘
libcoro-perl_6.080-3+rpi1_armhf.changes:
────────────────────────────────────────
Format: 1.8
Date: Fri, 13 Jul 2012 16:51:32 -0700
Source: libcoro-perl
Binary: libcoro-perl
Architecture: armhf
Version: 6.080-3+rpi1
Distribution: testing
Urgency: low
Maintainer: buildd
Changed-By: Peter Michael Green <plugwash@p10link.net>
Description:
libcoro-perl - Perl framework implementing coroutines
Changes:
libcoro-perl (6.080-3+rpi1) wheezy; urgency=low
.
* add build-depends on gcc-4.7
Checksums-Sha1:
ab46ab00bf50f6bbdca7c2e6a024be30aa8c3ea4 230302 libcoro-perl_6.080-3+rpi1_armhf.deb
Checksums-Sha256:
ea449ebd388fac91da362c8463414c4c95cb9f622ab6357fc1672728c2ab7042 230302 libcoro-perl_6.080-3+rpi1_armhf.deb
Files:
680408ef617113da37c73acc06d31be3 230302 perl optional libcoro-perl_6.080-3+rpi1_armhf.deb
┌──────────────────────────────────────────────────────────────────────────────┐
│ Package contents │
└──────────────────────────────────────────────────────────────────────────────┘
libcoro-perl_6.080-3+rpi1_armhf.deb
───────────────────────────────────
new debian package, version 2.0.
size 230302 bytes: control archive=2738 bytes.
1311 bytes, 26 lines control
4430 bytes, 63 lines md5sums
Package: libcoro-perl
Version: 6.080-3+rpi1
Architecture: armhf
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Installed-Size: 447
Depends: perl (>= 5.14.2-12+rpi1), perlapi-5.14.2, libc6 (>= 2.13-28), libguard-perl, libanyevent-perl, libcommon-sense-perl
Recommends: libevent-perl, libio-aio-perl
Section: perl
Priority: optional
Homepage: http://search.cpan.org/dist/Coro/
Description: Perl framework implementing coroutines
Coro is a collection of modules which manages continuations in general, most
often in the form of cooperative threads (also called coros, or simply "coro"
in the documentation). They do not actually execute at the same time, even on
machines with multiple processors.
.
The specific flavor of thread offered by this module also guarantees you that
it will not switch between threads unless necessary. It switches at easily-
identified points in your program, so locking and parallel access are rarely
an issue, making threaded programming much safer and easier than using other
threading models.
.
Coro provides a full shared address space, which makes communication between
threads very easy. A parallel matrix multiplication benchmark runs over 300
times faster on a single core than perl's ithreads on a quad core using all
four cores.
drwxr-xr-x root/root 0 2012-07-13 17:04 ./
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/perl5/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/perl5/auto/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/perl5/auto/Coro/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/perl5/auto/Coro/State/
-rw-r--r-- root/root 67748 2012-07-13 17:04 ./usr/lib/perl5/auto/Coro/State/State.so
-rw-r--r-- root/root 0 2012-07-13 17:03 ./usr/lib/perl5/auto/Coro/State/State.bs
-rw-r--r-- root/root 44176 2012-07-13 17:03 ./usr/lib/perl5/Coro.pm
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/lib/perl5/Coro/
-rw-r--r-- root/root 13572 2012-04-13 03:06 ./usr/lib/perl5/Coro/AnyEvent.pm
-rw-r--r-- root/root 4044 2012-04-13 03:06 ./usr/lib/perl5/Coro/Semaphore.pm
-rw-r--r-- root/root 3976 2012-04-13 03:06 ./usr/lib/perl5/Coro/LWP.pm
-rw-r--r-- root/root 17393 2012-04-13 03:06 ./usr/lib/perl5/Coro/State.pm
-rw-r--r-- root/root 5431 2012-04-13 03:06 ./usr/lib/perl5/Coro/Socket.pm
-rw-r--r-- root/root 2506 2012-04-13 03:06 ./usr/lib/perl5/Coro/MakeMaker.pm
-rw-r--r-- root/root 13219 2012-04-13 03:06 ./usr/lib/perl5/Coro/Handle.pm
-rw-r--r-- root/root 4602 2012-04-13 03:06 ./usr/lib/perl5/Coro/AIO.pm
-rwxr-xr-x root/root 2769 2012-07-13 17:03 ./usr/lib/perl5/Coro/jit-amd64-unix.pl
-rw-r--r-- root/root 3724 2012-04-13 03:06 ./usr/lib/perl5/Coro/Storable.pm
-rw-r--r-- root/root 1617 2012-04-13 03:06 ./usr/lib/perl5/Coro/Timer.pm
-rw-r--r-- root/root 3787 2012-04-13 03:06 ./usr/lib/perl5/Coro/Select.pm
-rwxr-xr-x root/root 2977 2012-07-13 17:03 ./usr/lib/perl5/Coro/jit-x86-unix.pl
-rw-r--r-- root/root 3647 2011-12-12 07:18 ./usr/lib/perl5/Coro/CoroAPI.h
-rw-r--r-- root/root 26830 2012-07-13 17:03 ./usr/lib/perl5/Coro/Intro.pod
-rw-r--r-- root/root 5529 2012-04-13 03:06 ./usr/lib/perl5/Coro/Util.pm
-rw-r--r-- root/root 1476 2012-04-13 03:06 ./usr/lib/perl5/Coro/BDB.pm
-rw-r--r-- root/root 2225 2012-04-13 03:06 ./usr/lib/perl5/Coro/Signal.pm
-rw-r--r-- root/root 3821 2012-04-13 03:06 ./usr/lib/perl5/Coro/Channel.pm
-rw-r--r-- root/root 2140 2012-04-13 03:06 ./usr/lib/perl5/Coro/RWLock.pm
-rw-r--r-- root/root 1790 2012-04-13 03:06 ./usr/lib/perl5/Coro/Specific.pm
-rw-r--r-- root/root 16398 2012-04-13 03:06 ./usr/lib/perl5/Coro/Debug.pm
-rw-r--r-- root/root 4089 2012-04-13 03:06 ./usr/lib/perl5/Coro/SemaphoreSet.pm
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/doc/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/doc/libcoro-perl/
-rw-r--r-- root/root 21080 2012-04-13 03:05 ./usr/share/doc/libcoro-perl/changelog.gz
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/doc/libcoro-perl/examples/
-rw-r--r-- root/root 526 2008-11-23 23:55 ./usr/share/doc/libcoro-perl/examples/lwp
-rw-r--r-- root/root 3188 2008-06-03 06:35 ./usr/share/doc/libcoro-perl/examples/myhttpd.gz
-rw-r--r-- root/root 1222 2008-11-23 20:56 ./usr/share/doc/libcoro-perl/examples/event
-rw-r--r-- root/root 240 2001-07-22 19:14 ./usr/share/doc/libcoro-perl/examples/attributes
-rw-r--r-- root/root 618 2001-07-16 17:24 ./usr/share/doc/libcoro-perl/examples/prodcons1
-rw-r--r-- root/root 752 2007-04-14 08:06 ./usr/share/doc/libcoro-perl/examples/readline
-rw-r--r-- root/root 1714 2011-12-12 07:18 ./usr/share/doc/libcoro-perl/examples/bench
-rw-r--r-- root/root 665 2006-11-06 11:40 ./usr/share/doc/libcoro-perl/examples/prodcons2
-rw-r--r-- root/root 316 2008-11-23 20:56 ./usr/share/doc/libcoro-perl/examples/dns
-rw-r--r-- root/root 620 2006-11-06 11:40 ./usr/share/doc/libcoro-perl/examples/prodcons3
-rw-r--r-- root/root 277 2005-03-03 09:20 ./usr/share/doc/libcoro-perl/README
-rw-r--r-- root/root 1655 2012-07-13 16:51 ./usr/share/doc/libcoro-perl/changelog.Debian.gz
-rw-r--r-- root/root 1207 2008-03-02 08:10 ./usr/share/doc/libcoro-perl/README.linux-glibc
-rw-r--r-- root/root 227 2012-06-28 07:22 ./usr/share/doc/libcoro-perl/NEWS.Debian.gz
-rw-r--r-- root/root 6771 2012-06-28 07:22 ./usr/share/doc/libcoro-perl/copyright
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/man/
drwxr-xr-x root/root 0 2012-07-13 17:04 ./usr/share/man/man3/
-rw-r--r-- root/root 2739 2012-07-13 17:04 ./usr/share/man/man3/Coro::Storable.3pm.gz
-rw-r--r-- root/root 4478 2012-07-13 17:04 ./usr/share/man/man3/Coro::Debug.3pm.gz
-rw-r--r-- root/root 3116 2012-07-13 17:04 ./usr/share/man/man3/Coro::Semaphore.3pm.gz
-rw-r--r-- root/root 17679 2012-07-13 17:04 ./usr/share/man/man3/Coro.3pm.gz
-rw-r--r-- root/root 3506 2012-07-13 17:04 ./usr/share/man/man3/Coro::AIO.3pm.gz
-rw-r--r-- root/root 2784 2012-07-13 17:04 ./usr/share/man/man3/Coro::Socket.3pm.gz
-rw-r--r-- root/root 3172 2012-07-13 17:04 ./usr/share/man/man3/Coro::Util.3pm.gz
-rw-r--r-- root/root 6137 2012-07-13 17:04 ./usr/share/man/man3/Coro::AnyEvent.3pm.gz
-rw-r--r-- root/root 2402 2012-07-13 17:04 ./usr/share/man/man3/Coro::Specific.3pm.gz
-rw-r--r-- root/root 2295 2012-07-13 17:04 ./usr/share/man/man3/Coro::RWLock.3pm.gz
-rw-r--r-- root/root 2570 2012-07-13 17:04 ./usr/share/man/man3/Coro::Signal.3pm.gz
-rw-r--r-- root/root 2784 2012-07-13 17:04 ./usr/share/man/man3/Coro::Select.3pm.gz
-rw-r--r-- root/root 2633 2012-07-13 17:04 ./usr/share/man/man3/Coro::MakeMaker.3pm.gz
-rw-r--r-- root/root 2268 2012-07-13 17:04 ./usr/share/man/man3/Coro::Timer.3pm.gz
-rw-r--r-- root/root 2803 2012-07-13 17:04 ./usr/share/man/man3/Coro::SemaphoreSet.3pm.gz
-rw-r--r-- root/root 3152 2012-07-13 17:04 ./usr/share/man/man3/Coro::Channel.3pm.gz
-rw-r--r-- root/root 8896 2012-07-13 17:04 ./usr/share/man/man3/Coro::State.3pm.gz
-rw-r--r-- root/root 2331 2012-07-13 17:04 ./usr/share/man/man3/Coro::BDB.3pm.gz
-rw-r--r-- root/root 3306 2012-07-13 17:04 ./usr/share/man/man3/Coro::LWP.3pm.gz
-rw-r--r-- root/root 12237 2012-07-13 17:04 ./usr/share/man/man3/Coro::Intro.3pm.gz
-rw-r--r-- root/root 3821 2012-07-13 17:04 ./usr/share/man/man3/Coro::Handle.3pm.gz
┌──────────────────────────────────────────────────────────────────────────────┐
│ Post Build │
└──────────────────────────────────────────────────────────────────────────────┘
┌──────────────────────────────────────────────────────────────────────────────┐
│ Cleanup │
└──────────────────────────────────────────────────────────────────────────────┘
Purging /«BUILDDIR»
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
bsdmainutils* cpp-4.7* debhelper* file* gcc-4.7* gettext* gettext-base*
groff-base* html2text* intltool-debian* libanyevent-perl* libasprintf0c2*
libcommon-sense-perl* libcroco3* libffi5* libgettextpo0* libglib2.0-0*
libguard-perl* libmagic1* libpcre3* libpipeline1* libunistring0* libxml2*
man-db* po-debconf* sbuild-build-depends-core-dummy*
sbuild-build-depends-libcoro-perl-dummy*
0 upgraded, 0 newly installed, 27 to remove and 5 not upgraded.
After this operation, 49.8 MB disk space will be freed.
(Reading database ... 12188 files and directories currently installed.)
Removing sbuild-build-depends-libcoro-perl-dummy ...
Removing debhelper ...
Removing man-db ...
Purging configuration files for man-db ...
Removing bsdmainutils ...
Purging configuration files for bsdmainutils ...
Removing gcc-4.7 ...
Removing cpp-4.7 ...
Removing file ...
Removing po-debconf ...
Removing intltool-debian ...
Removing gettext ...
Removing gettext-base ...
Removing groff-base ...
Purging configuration files for groff-base ...
Removing html2text ...
Purging configuration files for html2text ...
Removing libanyevent-perl ...
Removing libasprintf0c2:armhf ...
Removing libcommon-sense-perl ...
Removing libcroco3:armhf ...
Purging configuration files for libcroco3:armhf ...
Removing libglib2.0-0:armhf ...
Purging configuration files for libglib2.0-0:armhf ...
Removing libffi5:armhf ...
Purging configuration files for libffi5:armhf ...
Removing libgettextpo0:armhf ...
Removing libguard-perl ...
Removing libmagic1:armhf ...
Purging configuration files for libmagic1:armhf ...
Removing libpcre3:armhf ...
Purging configuration files for libpcre3:armhf ...
Removing libpipeline1:armhf ...
Purging configuration files for libpipeline1:armhf ...
Removing libunistring0:armhf ...
Purging configuration files for libunistring0:armhf ...
Removing libxml2:armhf ...
Purging configuration files for libxml2:armhf ...
Removing sbuild-build-depends-core-dummy ...
┌──────────────────────────────────────────────────────────────────────────────┐
│ Summary │
└──────────────────────────────────────────────────────────────────────────────┘
Build Architecture: armhf
Build-Space: 3412
Build-Time: 83
Distribution: testing
Host Architecture: armhf
Install-Time: 74
Job: libcoro-perl_6.080-3+rpi1
Machine Architecture: armhf
Package: libcoro-perl
Package-Time: 218
Source-Version: 6.080-3+rpi1
Space: 3412
Status: successful
Version: 6.080-3+rpi1
────────────────────────────────────────────────────────────────────────────────
Finished at 20120713-1704
Build needed 00:03:38, 3412k disc space