/* Automatically generated by po2tbl.sed from vice.pot.  */

#if HAVE_CONFIG_H
# include <config.h>
#endif

#include "libgettext.h"

const struct _msg_ent _msg_tbl[] = {
  {"", 1},
  {"\
Set device for joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: Digital \
joystick 0, 11: Digital joystick 1, 12: USB joystick 0, 13: USB joystick 1)", 2},
  {"\
Set device for joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: Digital \
joystick 0, 11: Digital joystick 1)", 3},
  {"\
Set device for joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5)", 4},
  {"\
Set device for joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset 2)", 5},
  {"\
Set device for joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: Digital \
joystick 0, 11: Digital joystick 1, 12: USB joystick 0, 13: USB joystick 1)", 6},
  {"\
Set device for joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: Digital \
joystick 0, 11: Digital joystick 1)", 7},
  {"\
Set device for joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, 7: \
Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5)", 8},
  {"\
Set device for joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset 2)", 9},
  {"\
Set device for extra joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: \
Digital joystick 0, 11: Digital joystick 1, 12: USB joystick 0, 13: USB \
joystick 1)", 10},
  {"\
Set device for extra joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: \
Digital joystick 0, 11: Digital joystick 1)", 11},
  {"\
Set device for extra joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5)", 12},
  {"\
Set device for extra joystick port 1 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2)", 13},
  {"\
Set device for extra joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: \
Digital joystick 0, 11: Digital joystick 1, 12: USB joystick 0, 13: USB \
joystick 1)", 14},
  {"\
Set device for extra joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5, 10: \
Digital joystick 0, 11: Digital joystick 1)", 15},
  {"\
Set device for extra joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Analog joystick 0, 5: Analog joystick 1, 6: Analog joystick 2, \
7: Analog joystick 3, 8: Analog joystick 4, 9: Analog joystick 5)", 16},
  {"\
Set device for extra joystick port 2 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2)", 17},
  {"<Name>", 18},
  {"Specify MIDI-In device", 19},
  {"Specify MIDI-Out device", 20},
  {"<Driver>", 21},
  {"Specify MIDI driver (0 = OSS, 1 = ALSA)", 22},
  {"<baudrate>", 23},
  {"Specify baudrate of first RS232 device", 24},
  {"Specify baudrate of second RS232 device", 25},
  {"Specify baudrate of third RS232 device", 26},
  {"Specify baudrate of fourth RS232 device", 27},
  {"Extra SIDs", 28},
  {"Second SID base address", 29},
  {"Third SID base address", 30},
  {"SID filters", 31},
  {"reSID sampling method", 32},
  {"reSID resampling passband", 33},
  {"None", 34},
  {"Function ROM image", 35},
  {"\
Could not load function ROM image\n\
'%s'", 36},
  {"Internal Function ROM type", 37},
  {"Internal Function ROM file", 38},
  {"enable internal Function ROM RTC saving", 39},
  {"External Function ROM type", 40},
  {"External Function ROM file", 41},
  {"enable external Function ROM RTC saving", 42},
  {"Function ROM", 43},
  {"Banks 2 & 3", 44},
  {"Ethernet emulation", 45},
  {"MIDI emulation", 46},
  {"Reset on cart change", 47},
  {"Load new International Kernal ROM", 48},
  {"Load new German Kernal ROM", 49},
  {"Load new Finnish Kernal ROM", 50},
  {"Load new French Kernal ROM", 51},
  {"Load new Italian Kernal ROM", 52},
  {"Load new Norwegian Kernal ROM", 53},
  {"Load new Swedish Kernal ROM", 54},
  {"Load new Swiss Kernal ROM", 55},
  {"Load new Basic Lo ROM", 56},
  {"Load new Basic Hi ROM", 57},
  {"Load new International character ROM", 58},
  {"Load new German character ROM", 59},
  {"Load new French character ROM", 60},
  {"Load new Swedish character ROM", 61},
  {"Load new Swiss character ROM", 62},
  {"Load new C64 Kernal ROM", 63},
  {"Load new C64 Basic ROM", 64},
  {"Load default ROMs", 65},
  {"Load new computer ROM", 66},
  {"Load new drive ROM", 67},
  {"Load new drive expansion ROM", 68},
  {"ROM set archive", 69},
  {"ROM set file", 70},
  {"VIC II Save media file", 71},
  {"VDC Save media file", 72},
  {"Screenshots", 73},
  {"International", 74},
  {"Finnish", 75},
  {"French", 76},
  {"German", 77},
  {"Italian", 78},
  {"Norwegian", 79},
  {"Swedish", 80},
  {"Swiss", 81},
  {"6526 (old)", 82},
  {"6526A (new)", 83},
  {"C128 model", 84},
  {"Machine type", 85},
  {"VIC-II model", 86},
  {"SID model", 87},
  {"VDC model", 88},
  {"CIA 1 model", 89},
  {"CIA 2 model", 90},
  {"Always switch to C64 mode on reset", 91},
  {"Model settings", 92},
  {"RAM reset pattern", 93},
  {"ROM settings", 94},
  {"VIC-II settings", 95},
  {"VDC settings", 96},
  {"SID settings", 97},
  {"Memory and I/O extensions", 98},
  {"RS232 settings", 99},
  {"Printer settings", 100},
  {"Enable Virtual Devices", 101},
  {"Mouse emulation", 102},
  {"Lightpen emulation", 103},
  {"File", 104},
  {"Edit", 105},
  {"Snapshot", 106},
  {"Settings", 107},
  {"Debug", 108},
  {"RJHelp", 109},
  {"Load new kernal ROM", 110},
  {"Load new BASIC ROM", 111},
  {"Load new character ROM", 112},
  {"Save media file", 113},
  {"DTV model", 114},
  {"DTV revision", 115},
  {"Flash settings", 116},
  {"I/O extensions", 117},
  {"Blitter Log", 118},
  {"DMA Log", 119},
  {"Flash Log", 120},
  {"C64 old PAL", 121},
  {"C64 old NTSC", 122},
  {"6569R1 (old PAL)", 123},
  {"6567R56A (old NTSC)", 124},
  {"6526 (new)", 125},
  {"Discrete", 126},
  {"Custom IC", 127},
  {"yes", 128},
  {"no", 129},
  {"Rev 1", 130},
  {"Rev 2", 131},
  {"Rev 3", 132},
  {"SX-64", 133},
  {"4064", 134},
  {"other", 135},
  {"C64 model", 136},
  {"Glue logic", 137},
  {"Reset goes to IEC", 138},
  {"Kernal Revision", 139},
  {"CIA1", 140},
  {"CIA2", 141},
  {"detach all", 142},
  {"detach last", 143},
  {"AND values", 144},
  {"C64 Memory Expansions Hack", 145},
  {"Burst Mode Modification", 146},
  {"I/O collision handling", 147},
  {"Japanese", 148},
  {"MAX Machine", 149},
  {"Old PAL-G", 150},
  {"Old NTSC-M", 151},
  {"Memory Expansions Hack", 152},
  {"Basic 128k, low chars", 153},
  {"Basic 256k, low chars", 154},
  {"Basic 128k, high chars", 155},
  {"Basic 256k, high chars", 156},
  {"Graphics", 157},
  {"Business (UK)", 158},
  {"Model defaults", 159},
  {"CIA model", 160},
  {"Memory size", 161},
  {"Hardwired switches", 162},
  {"Bank 15 $0800-$0FFF RAM", 163},
  {"Bank 15 $1000-$1FFF RAM", 164},
  {"Bank 15 $2000-$3FFF RAM", 165},
  {"Bank 15 $4000-$5FFF RAM", 166},
  {"Bank 15 $6000-$7FFF RAM", 167},
  {"Bank 15 $C000-$CFFF RAM", 168},
  {"Keyboard type", 169},
  {"CRTC settings", 170},
  {"RAM settings", 171},
  {"Enable", 172},
  {"SID address", 173},
  {"SID clock", 174},
  {"Business (DE)", 175},
  {"Auto (from ROM)", 176},
  {"40 Columns", 177},
  {"80 Columns", 178},
  {"Load new editor ROM", 179},
  {"PET RAM and Expansion Unit", 180},
  {"PET Colour graphics", 181},
  {"PET DWW hi-res graphics", 182},
  {"PET HRE hi-res graphics", 183},
  {"SID cartridge", 184},
  {"Userport DAC", 185},
  {"PET userport diagnostic pin", 186},
  {"Basic 1", 187},
  {"Basic 2, graphics", 188},
  {"Basic 2, Business", 189},
  {"Basic 4, 40 cols, graphics", 190},
  {"Basic 4, 40 cols, business", 191},
  {"Basic 4, 80 cols, business", 192},
  {"Basic 1 Patch (if loaded)", 193},
  {"Basic 1 character set", 194},
  {"Original character set", 195},
  {"German character set", 196},
  {"Load new $9*** ROM", 197},
  {"Unload $9*** ROM", 198},
  {"Load new $A*** ROM", 199},
  {"Unload $A*** ROM", 200},
  {"Load new $B*** ROM", 201},
  {"Unload $B*** ROM", 202},
  {"Load new $C*** ROM", 203},
  {"Load new $D*** ROM", 204},
  {"Load new $E*** ROM", 205},
  {"Load new $F*** ROM", 206},
  {"PET model", 207},
  {"Video size", 208},
  {"I/O size", 209},
  {"CRTC chip enable", 210},
  {"EOI blanks screen", 211},
  {"SuperPET I/O enable (disables 8x96)", 212},
  {"SuperPET ACIA", 213},
  {"SuperPET CPU Switch", 214},
  {"SuperPET 6809 ROMs", 215},
  {"$9*** as RAM (8296 only)", 216},
  {"$A*** as RAM (8296 only)", 217},
  {"Load new 3 plus 1 LO ROM", 218},
  {"Load new 3 plus 1 HI ROM", 219},
  {"Load new c1 LO ROM", 220},
  {"Load new c1 HI ROM", 221},
  {"Load new c2 LO ROM", 222},
  {"Load new c2 HI ROM", 223},
  {"ACIA", 224},
  {"Digiblaster add-on", 225},
  {"V364 Speech", 226},
  {"Model", 227},
  {"TED model", 228},
  {"TED settings", 229},
  {"Serial 1", 230},
  {"Serial 2", 231},
  {"Dump to file", 232},
  {"Exec process", 233},
  {"Attach Disk Image as unit #%d", 234},
  {"Invalid Disk Image", 235},
  {"Invalid Disk Image or Filename", 236},
  {"Unit #8", 237},
  {"Unit #9", 238},
  {"Unit #10", 239},
  {"Unit #11", 240},
  {"All", 241},
  {"Attach disk image", 242},
  {"Create and attach an empty disk", 243},
  {"Detach disk image", 244},
  {"Flip list", 245},
  {"Create a new tape image", 246},
  {"File exists", 247},
  {"Do you want to overwrite it?", 248},
  {"Attach tape image", 249},
  {"Invalid Tape Image", 250},
  {"Detach tape image", 251},
  {"Smart-attach a file", 252},
  {"Unknown image type", 253},
  {"Smart-attach disk/tape", 254},
  {"Autostart settings", 255},
  {"Name", 256},
  {"Disk image for PRG autostart", 257},
  {"\
Enter maximum random autostart delay in frames\n\
(max. 1000, 0 means default)", 258},
  {"Autostart delay", 259},
  {"Virtual FS", 260},
  {"Inject to RAM", 261},
  {"Disk image", 262},
  {"Handle True Drive Emulation on autostart", 263},
  {"Autostart warp", 264},
  {"Autostart random delay", 265},
  {"Maximum random autostart delay", 266},
  {"Use ':' with RUN", 267},
  {"Load to BASIC start", 268},
  {"PRG autostart mode", 269},
  {"PRG autostart disk image", 270},
  {"Attach cartridge image", 271},
  {"Cannot attach cartridge", 272},
  {"Smart attach CRT image", 273},
  {"Attach raw 8KB cartridge image", 274},
  {"Attach raw 16KB cartridge image", 275},
  {"Attach raw ultimax cartridge image", 276},
  {"Freezer", 277},
  {"Games", 278},
  {"Utilities", 279},
  {"Set cartridge as default", 280},
  {"Detach cartridge image(s)", 281},
  {"Cartridge freeze", 282},
  {"C64DTV ROM file", 283},
  {"Enable writes to C64DTV ROM image", 284},
  {"Hummer ADC", 285},
  {"C64 256K file", 286},
  {"+60K file", 287},
  {"+256K file", 288},
  {"C64 memory expansions hack device", 289},
  {"C64 256K base address", 290},
  {"C64 256K image name", 291},
  {"+60K Base address", 292},
  {"+60K Image name", 293},
  {"+256K image name", 294},
  {"\
\n\
Available command-line options:\n\
\n", 295},
  {"VICE setting", 296},
  {"Change current working directory", 297},
  {"Directory not found", 298},
  {"Couldn't run /bin/sh???", 299},
  {"Couldn't run terminal", 300},
  {"Unknown error while running c1541", 301},
  {"Command", 302},
  {"Command to execute for browsing html files", 303},
  {"No HTML browser is defined.", 304},
  {"Browser command too long.", 305},
  {"Cannot run HTML browser.", 306},
  {"Load snapshot image", 307},
  {"\
Cannot load snapshot file\n\
`%s'", 308},
  {"\
Cannot write snapshot file\n\
`%s'\n", 309},
  {"Select history directory", 310},
  {"Path:", 311},
  {"Media Recording stopped", 312},
  {"Record sound to file", 313},
  {"Sound Recording started", 314},
  {"Soft", 315},
  {"Hard", 316},
  {"Ask", 317},
  {"Continue", 318},
  {"Start monitor", 319},
  {"Reset", 320},
  {"Hard reset", 321},
  {"Quit emulator", 322},
  {"Save new snapshot", 323},
  {"Load existing snapshot", 324},
  {"Start with reset", 325},
  {"Overwrite running playback", 326},
  {"Save snapshot image", 327},
  {"Quickload snapshot", 328},
  {"Quicksave snapshot", 329},
  {"Start recording events", 330},
  {"Stop recording events", 331},
  {"Start playing back events", 332},
  {"Stop playing back events", 333},
  {"Set recording milestone", 334},
  {"Return to milestone", 335},
  {"Recording start mode", 336},
  {"Snapshot commands", 337},
  {"Sound record WAV", 338},
  {"Sound record AIFF", 339},
  {"Sound record VOC", 340},
  {"Sound record IFF", 341},
  {"Sound record MP3", 342},
  {"Stop Sound record", 343},
  {"Sound recording", 344},
  {"Select server address", 345},
  {"Keep monitor open", 346},
  {"Enable remote monitor server", 347},
  {"Set remote monitor server address", 348},
  {"Activate monitor", 349},
  {"Monitor settings", 350},
  {"Run C1541", 351},
  {"Available command-line options:", 352},
  {"Browse manuals", 353},
  {"Commandline options", 354},
  {"About VICE", 355},
  {"Set browser command", 356},
  {"Action on CPU JAM", 357},
  {"Pause", 358},
  {"Enable warp mode", 359},
  {"Exit emulator", 360},
  {"Internal", 361},
  {"Default (Green)", 362},
  {"Amber", 363},
  {"White", 364},
  {"Load custom", 365},
  {"Unfiltered", 366},
  {"CRT emulation", 367},
  {"Scale2x", 368},
  {"Enter refresh rate", 369},
  {"Refresh rate", 370},
  {"Double size", 371},
  {"Stretch vertically", 372},
  {"Double scan", 373},
  {"Video cache", 374},
  {"Colors", 375},
  {"Render filter", 376},
  {"Audio leak emulation", 377},
  {"Hardware scaling", 378},
  {"Keep aspect ratio", 379},
  {"True aspect ratio", 380},
  {"Set custom aspect ratio", 381},
  {"Alpha Blending", 382},
  {"OpenGL Rastersynchronization", 383},
  {"Desktop Refreshrate", 384},
  {"Fullscreen settings", 385},
  {"Use XSync()", 386},
  {"Datasette zero gap delay", 387},
  {"Datasette speed tuning", 388},
  {"Datasette tape wobble", 389},
  {"Invalid value: %s", 390},
  {"Stop", 391},
  {"Play", 392},
  {"Forward", 393},
  {"Rewind", 394},
  {"Record", 395},
  {"Reset Datasette with CPU", 396},
  {"Datassette control", 397},
  {"Userport", 398},
  {"Base address", 399},
  {"Image name", 400},
  {"Save image when changed", 401},
  {"Save image now", 402},
  {"Save image as", 403},
  {"DQBB file", 404},
  {"Can not save cartridge", 405},
  {"Never extend", 406},
  {"Ask on extend", 407},
  {"Extend on access", 408},
  {"True drive emulation", 409},
  {"Drive sound emulation", 410},
  {"Select Flash filesystem directory", 411},
  {"Enable true hardware flash file system", 412},
  {"Set Flash filesystem directory", 413},
  {"Drive #8 model", 414},
  {"Drive #8 expansion", 415},
  {"Drive #8 40-track image support", 416},
  {"Drive #8 idle method", 417},
  {"Drive #9 model", 418},
  {"Drive #9 expansion", 419},
  {"Drive #9 40-track image support", 420},
  {"Drive #9 idle method", 421},
  {"Drive #10 model", 422},
  {"Drive #10 expansion", 423},
  {"Drive #10 40-track image support", 424},
  {"Drive #10 idle method", 425},
  {"Drive #11 model", 426},
  {"Drive #11 expansion", 427},
  {"Drive #11 40-track image support", 428},
  {"Drive #11 idle method", 429},
  {"RAW Block Device Name", 430},
  {"Drive settings", 431},
  {"Load new 1540 ROM", 432},
  {"Load new 1541 ROM", 433},
  {"Load new 1541-II ROM", 434},
  {"Load new 1570 ROM", 435},
  {"Load new 1571 ROM", 436},
  {"Load new 1571CR ROM", 437},
  {"Load new 1581 ROM", 438},
  {"Load new 2000 ROM", 439},
  {"Load new 4000 ROM", 440},
  {"Load new 2031 ROM", 441},
  {"Load new 2040 ROM", 442},
  {"Load new 3040 ROM", 443},
  {"Load new 4040 ROM", 444},
  {"Load new 1001 ROM", 445},
  {"Standard Userport", 446},
  {"Dolphin DOS 3", 447},
  {"Formel 64", 448},
  {"Parallel cable", 449},
  {"Enable Professional DOS", 450},
  {"Enable SuperCard+", 451},
  {"Load new Professional DOS 1571 ROM", 452},
  {"Load new SuperCard+ ROM", 453},
  {"No traps", 454},
  {"Skip cycles", 455},
  {"Trap idle", 456},
  {"Load new 1551 ROM", 457},
  {"Enable jumper", 458},
  {"Optimize image when saving", 459},
  {"Prg", 460},
  {"Off", 461},
  {"On", 462},
  {"Expert Cartridge file", 463},
  {"Load ", 464},
  {"Save", 465},
  {"Flip list file", 466},
  {"Successfully read `%s'.", 467},
  {"Error reading `%s'.", 468},
  {"Successfully wrote `%s'", 469},
  {"Error writing `%s'.", 470},
  {"Add current image (Unit 8)", 471},
  {"Remove current image (Unit 8)", 472},
  {"Attach next image (Unit 8)", 473},
  {"Attach previous image (Unit 8)", 474},
  {"Load flip list file", 475},
  {"Save flip list file", 476},
  {"Attach #%d", 477},
  {"Detach #%d", 478},
  {"Read-only", 479},
  {"Next: ", 480},
  {"empty", 481},
  {"Previous: ", 482},
  {"Add: ", 483},
  {"Remove: ", 484},
  {"VidMode Resolutions", 485},
  {"XRandR Resolutions", 486},
  {"Enable fullscreen", 487},
  {"Show Statusbar/Menu", 488},
  {"Fullscreen device", 489},
  {"Size", 490},
  {"MasC=uerade I/O swap", 491},
  {"GEO-RAM file", 492},
  {"IDE64 interface image", 493},
  {"Enter number of cylinders", 494},
  {"Cylinders", 495},
  {"Enter number of heads", 496},
  {"Heads", 497},
  {"Enter number of sectors", 498},
  {"Sectors", 499},
  {"IDE64 USB setting", 500},
  {"USB server address:", 501},
  {"Version 3", 502},
  {"Version 4", 503},
  {"Device 1 image name", 504},
  {"Autodetect image size", 505},
  {"Device 2 image name", 506},
  {"Device 3 image name", 507},
  {"Device 4 image name", 508},
  {"Revision", 509},
  {"Enable USB server", 510},
  {"Set USB server address", 511},
  {"Enable RTC saving", 512},
  {"Device 1 settings", 513},
  {"Device 2 settings", 514},
  {"Device 3 settings", 515},
  {"Device 4 settings", 516},
  {"Enable switch", 517},
  {"ISEPIC image", 518},
  {"CGA userport joy adapter", 519},
  {"PET userport joy adapter", 520},
  {"Hummer userport joy adapter", 521},
  {"OEM userport joy adapter", 522},
  {"HIT userport joy adapter", 523},
  {"Kingsoft userport joy adapter", 524},
  {"Starbyte userport joy adapter", 525},
  {"Numpad", 526},
  {"Keyset A", 527},
  {"Keyset B", 528},
  {"Analog Joystick 0", 529},
  {"Analog Joystick 1", 530},
  {"Analog Joystick 2", 531},
  {"Analog Joystick 3", 532},
  {"Analog Joystick 4", 533},
  {"Analog Joystick 5", 534},
  {"Digital Joystick 0", 535},
  {"Digital Joystick 1", 536},
  {"USB Joystick 0", 537},
  {"USB Joystick 1", 538},
  {"Joystick in port #1", 539},
  {"Joystick in port #2", 540},
  {"Define keysets", 541},
  {"Allow opposite directions", 542},
  {"Allow keyset joystick", 543},
  {"Swap joysticks", 544},
  {"Userport joystick adapter", 545},
  {"Userport joystick adapter type", 546},
  {"Joystick in extra port #1", 547},
  {"Joystick in extra port #2", 548},
  {"Swap userport joysticks", 549},
  {"SIDcart joystick", 550},
  {"Joystick settings", 551},
  {"Symbolic mapping", 552},
  {"Positional mapping", 553},
  {"Read Keymap File", 554},
  {"Write to Keymap File:", 555},
  {"Set symbolic keymap file", 556},
  {"Set positional keymap file", 557},
  {"Keyboard mapping type", 558},
  {"Select symbolic keymap", 559},
  {"Select positional keymap", 560},
  {"Dump keymap to file", 561},
  {"Keyboard settings", 562},
  {"Pen with button Up", 563},
  {"Pen with button Left", 564},
  {"Datel Pen", 565},
  {"Magnum Light Phaser", 566},
  {"Stack Light Rifle", 567},
  {"Inkwell Pen", 568},
  {"Enable lightpen emulation", 569},
  {"Lightpen type", 570},
  {"Magic Voice file", 571},
  {"MIDI-In device", 572},
  {"MIDI-Out device", 573},
  {"Type", 574},
  {"Driver", 575},
  {"Rev. A", 576},
  {"Rev. B", 577},
  {"Auto", 578},
  {"Enable flashjumper", 579},
  {"Card image file", 580},
  {"Enable writes to card image", 581},
  {"Card type", 582},
  {"MMC64 BIOS name", 583},
  {"MMC64 image", 584},
  {"Enable rescue mode", 585},
  {"EEPROM image file", 586},
  {"Enable writes to MMC Replay EEPROM image", 587},
  {"MMC Replay card image filename", 588},
  {"MMC Replay EEPROM image filename", 589},
  {"Paddles", 590},
  {"Port 1", 591},
  {"Port 2", 592},
  {"Enable mouse grab", 593},
  {"Mouse type", 594},
  {"Mouse port", 595},
  {"Enable SmartMouse RTC saving", 596},
  {"Enable paddles", 597},
  {"Enter port", 598},
  {"Netplay TCP port", 599},
  {"Invalid TCP port", 600},
  {"Error starting the netplay server.", 601},
  {"Netplay Server name", 602},
  {"Hostname:", 603},
  {"Error connecting to server.", 604},
  {"Netplay", 605},
  {"TCP port", 606},
  {"Start server", 607},
  {"Server to connect to", 608},
  {"Connect to server", 609},
  {"Disconnect", 610},
  {"Load custom palette", 611},
  {"\
Could not load palette file\n\
'%s'", 612},
  {"Path", 613},
  {"Select block device for raw access", 614},
  {"File system access", 615},
  {"Real device access", 616},
  {"Raw device access", 617},
  {"Enable IEC device", 618},
  {"Read only access", 619},
  {"File system directory", 620},
  {"Convert P00 file names", 621},
  {"Create P00 files on save", 622},
  {"Hide non-P00 files", 623},
  {"Drive #8 device type", 624},
  {"Drive #8 options", 625},
  {"Drive #9 device type", 626},
  {"Drive #9 options", 627},
  {"Drive #10 device type", 628},
  {"Drive #10 options", 629},
  {"Drive #11 device type", 630},
  {"Drive #11 options", 631},
  {"\
Enter PET Colour background\n\
(range: 0-255)", 632},
  {"PET Colour background", 633},
  {"PET Colour type", 634},
  {"PET DWW file", 635},
  {"PET REU file", 636},
  {"Printer 1 (file dump)", 637},
  {"Printer 2 (exec)", 638},
  {"Printer 3 (exec)", 639},
  {"Select printer dump file", 640},
  {"Command to execute for printing (preceed with '|')", 641},
  {"Userport printer emulation", 642},
  {"Userport printer driver", 643},
  {"Userport printer output", 644},
  {"Userport printer text output device", 645},
  {"Userport printer formfeed", 646},
  {"Printer #4 emulation", 647},
  {"Printer #4 enable IEC device", 648},
  {"Printer #4 driver", 649},
  {"Printer #4 output", 650},
  {"Printer #4 text output device", 651},
  {"Printer #4 formfeed", 652},
  {"Printer #5 emulation", 653},
  {"Printer #5 enable IEC device", 654},
  {"Printer #5 driver", 655},
  {"Printer #5 output", 656},
  {"Printer #5 text output device", 657},
  {"Printer #5 formfeed", 658},
  {"Printer #6 emulation", 659},
  {"Printer #6 enable IEC device", 660},
  {"Printer #6 driver", 661},
  {"Printer #6 output", 662},
  {"Printer #6 text output device", 663},
  {"Printer #6 formfeed", 664},
  {"Device #7 Real device access", 665},
  {"Device #7 enable IEC device", 666},
  {"Printer text device 1", 667},
  {"Printer text device 2", 668},
  {"Printer text device 3", 669},
  {"Grab mouse events", 670},
  {"PS/2 mouse on Userport", 671},
  {"RamCart file", 672},
  {"Enable bankjumper", 673},
  {"REU file", 674},
  {"Load ROM file", 675},
  {"\
Could not load ROM file\n\
'%s'", 676},
  {"Load custom ROM set archive", 677},
  {"\
Could not load ROM set archive\n\
'%s'", 678},
  {"File to save ROM set archive to", 679},
  {"Current ROM set archive", 680},
  {"ROM set item name to create", 681},
  {"ROM set name:", 682},
  {"Delete configuration", 683},
  {"Enter name", 684},
  {"Active configuration", 685},
  {"Load ROM set archive", 686},
  {"Save ROM set archive", 687},
  {"List current ROM set archive", 688},
  {"Create ROM set item", 689},
  {"Delete ROM set item", 690},
  {"Select ROM set item", 691},
  {"Load custom ROM set file", 692},
  {"\
Could not load ROM set file\n\
'%s'", 693},
  {"File to save ROM set definition to", 694},
  {"Current ROM set", 695},
  {"Load custom ROM set from file", 696},
  {"Dump ROM set definition to file", 697},
  {"List current ROM set", 698},
  {"38400 (Swiftlink/Turbo232 only)", 699},
  {"57600 (Turbo232 only)", 700},
  {"115200 (Turbo232 only)", 701},
  {"Select RS232 device file", 702},
  {"Command to execute for RS232 (preceed with '|')", 703},
  {"File to dump RS232 to", 704},
  {"No IRQ/NMI", 705},
  {"Normal", 706},
  {"ACIA RS232 interface emulation", 707},
  {"ACIA device", 708},
  {"ACIA base address", 709},
  {"ACIA interrupt", 710},
  {"ACIA emulation mode", 711},
  {"Userport RS232 emulation", 712},
  {"Userport RS232 baud rate", 713},
  {"Userport RS232 device", 714},
  {"Serial 1 device", 715},
  {"Serial 1 baudrate", 716},
  {"Serial 2 baudrate", 717},
  {"Dump filename", 718},
  {"Program name to exec", 719},
  {"ACIA RS232 interface emulation (MasC=uerade)", 720},
  {"Serial 2 device", 721},
  {"Enter speed", 722},
  {"Maximum speed", 723},
  {"Invalid speed value", 724},
  {"Cannot save settings.", 725},
  {"Settings saved successfully.", 726},
  {"\
Cannot load settings:\n\
resource file not valid.", 727},
  {"\
Cannot load settings:\n\
resource file not found.", 728},
  {"File to save settings to", 729},
  {"Resource file name", 730},
  {"Custom", 731},
  {"No limit", 732},
  {"Save settings", 733},
  {"Load settings", 734},
  {"Save settings to file", 735},
  {"Load settings from file", 736},
  {"Restore default settings", 737},
  {"Save settings on exit", 738},
  {"Confirm quitting VICE", 739},
  {"Enter auto playback frames", 740},
  {"Auto playback frames", 741},
  {"Small", 742},
  {"History", 743},
  {"Autoplay", 744},
  {"Trace Mode", 745},
  {"Main CPU Trace", 746},
  {"Drive0 CPU Trace", 747},
  {"Drive1 CPU Trace", 748},
  {"Drive2 CPU Trace", 749},
  {"Drive3 CPU Trace", 750},
  {"Autoplay playback frames", 751},
  {"Save core dump", 752},
  {"Debug settings", 753},
  {"8580 + digi boost (ReSID)", 754},
  {"ParSID Port 1", 755},
  {"ParSID Port 2", 756},
  {"ParSID Port 3", 757},
  {"Fast", 758},
  {"Interpolating", 759},
  {"Resampling", 760},
  {"Fast resampling", 761},
  {"\
Enter passband in percentage of total bandwidth\n\
(0 - 90, lower is faster, higher is better)", 762},
  {"Passband percentage", 763},
  {"One", 764},
  {"Two", 765},
  {"Sound driver argument", 766},
  {"Argument:", 767},
  {"Very small", 768},
  {"Medium", 769},
  {"Large", 770},
  {"Very large", 771},
  {"Keep going", 772},
  {"1 s suspend", 773},
  {"2 s suspend", 774},
  {"5 s suspend", 775},
  {"10 s suspend", 776},
  {"Flexible", 777},
  {"Adjusting", 778},
  {"Exact", 779},
  {"System", 780},
  {"Mono", 781},
  {"Stereo", 782},
  {"Enable sound playback", 783},
  {"Sound device name", 784},
  {"Output mode", 785},
  {"Sound synchronization", 786},
  {"Sample rate", 787},
  {"Buffer size", 788},
  {"Fragment size", 789},
  {"Suspend time", 790},
  {"Sound settings", 791},
  {"YM chip type", 792},
  {"Default", 793},
  {"Full", 794},
  {"Border mode", 795},
  {"Ethernet interface", 796},
  {"RR-Net compatibility mode", 797},
  {"Interface", 798},
  {"IEEE488 Interface image", 799},
  {"Speech ROM image", 800},
  {"Composite", 801},
  {"Rev 0", 802},
  {"64KB video memory", 803},
  {"Color settings", 804},
  {"New luminances", 805},
  {"Sprite-sprite collisions", 806},
  {"Sprite-background collisions", 807},
  {"VSP bug emulation", 808},
  {"No expansion memory", 809},
  {"3K (block 0)", 810},
  {"8K (block 1)", 811},
  {"16K (blocks 1/2)", 812},
  {"24K (blocks 1/2/3)", 813},
  {"All (blocks 0/1/2/3/5)", 814},
  {"Common configurations", 815},
  {"Block 0 (3K at $0400-$0FFF)", 816},
  {"Block 1 (8K at $2000-$3FFF)", 817},
  {"Block 2 (8K at $4000-$5FFF)", 818},
  {"Block 3 (8K at $6000-$7FFF)", 819},
  {"Block 5 (8K at $A000-$BFFF)", 820},
  {"Invalid cartridge image", 821},
  {"Smart-attach cartridge image", 822},
  {"Attach 4/8/16KB cartridge image at $2000", 823},
  {"Attach 4/8/16KB cartridge image at $4000", 824},
  {"Attach 4/8/16KB cartridge image at $6000", 825},
  {"Attach 4/8KB cartridge image at $A000", 826},
  {"Attach 4KB cartridge image at $B000", 827},
  {"Attach generic image", 828},
  {"Attach Mega-Cart image", 829},
  {"Attach Final Expansion image", 830},
  {"Attach Vic Flash Plugin image", 831},
  {"Add to generic cartridge", 832},
  {"Mega-Cart NvRAM image", 833},
  {"Enable image write back", 834},
  {"Enable NvRAM image write back", 835},
  {"NvRAM image file", 836},
  {"VIC model", 837},
  {"Memory expansions", 838},
  {"Ethernet emulation (MasC=uerade)", 839},
  {"VIC settings", 840},
  {"Paddle emulation", 841},
  {"Tunes", 842},
  {"Load PSID file", 843},
  {"Override PSID settings", 844},
  {"Video standard", 845},
  {"Default Tune", 846},
  {"Tune %d", 847},
  {"VSID: The SID emulator", 848},
  {"VICE is FREE software!", 849},
  {"No warranty!", 850},
  {"Contributors to the VICE project", 851},
  {"Compile time features", 852},
  {"Text cannot be displayed.", 853},
  {"The VICE Team:", 854},
  {"Official VICE homepage:", 855},
  {"(c) 1998 - 2015 The VICE Team", 856},
  {"License", 857},
  {"Warranty", 858},
  {"Contributors", 859},
  {"Features", 860},
  {"Save cartridge image", 861},
  {"Invalid filename", 862},
  {"\
Cannot write cartridge image file\n\
`%s'\n", 863},
  {"Create empty disk", 864},
  {"Disk options", 865},
  {"Disk name:", 866},
  {"Can't create image `%s'.", 867},
  {"Copy", 868},
  {"Paste", 869},
  {"Keyboard", 870},
  {"Joystick 1", 871},
  {"Joystick 2", 872},
  {"Devices", 873},
  {"Invalid port number", 874},
  {"Idle", 875},
  {"Server listening", 876},
  {"Connected server", 877},
  {"Connected client", 878},
  {"Couldn't start netplay server.", 879},
  {"Couldn't connect client.", 880},
  {"Unknown", 881},
  {"Connect to", 882},
  {"Current mode", 883},
  {"Netplay Settings", 884},
  {"Control", 885},
  {"Server", 886},
  {"Client", 887},
  {"Brightness", 888},
  {"Contrast", 889},
  {"Saturation", 890},
  {"Tint", 891},
  {"Gamma", 892},
  {"Blur", 893},
  {"Scanline shade", 894},
  {"Odd lines phase", 895},
  {"Odd lines offset", 896},
  {"Volume", 897},
  {"Drives Volume", 898},
  {"ReSID Passband", 899},
  {"ReSID Gain", 900},
  {"ReSID Filter Bias", 901},
  {"Display Thread Rate", 902},
  {"Display Thread Ghosting", 903},
  {"CRT emulation settings", 904},
  {"Mixer", 905},
  {"Oversize handling", 906},
  {"scale down", 907},
  {"crop left top", 908},
  {"crop center top", 909},
  {"crop right top", 910},
  {"crop left center", 911},
  {"crop center", 912},
  {"crop right center", 913},
  {"crop left bottom", 914},
  {"crop center bottom", 915},
  {"crop right bottom", 916},
  {"Undersize handling", 917},
  {"scale up", 918},
  {"add borders", 919},
  {"Multicolor handling", 920},
  {"b&w", 921},
  {"2 colors", 922},
  {"4 colors", 923},
  {"gray scale", 924},
  {"best cell colors", 925},
  {"TED luma handling", 926},
  {"ignore", 927},
  {"dither", 928},
  {"CRTC textcolor", 929},
  {"white", 930},
  {"amber", 931},
  {"green", 932},
  {"Media Format", 933},
  {"Format", 934},
  {"Audio codec", 935},
  {"Video codec", 936},
  {"Audio bitrate", 937},
  {"Video bitrate", 938},
  {"Half Framerate (25/30 fps)", 939},
  {"Couldn't write screenshot to `%s' with driver `%s'.", 940},
  {"Snapshot options", 941},
  {"Save currently attached disk images", 942},
  {"Save currently loaded ROM images", 943},
  {"Successfully wrote `%s'\n", 944},
  {"\
Name: %s\n\
Author: %s\n\
Copyright: %s\n\
\n\
Tune: %d of %d (Default: %d)\n\
%s\n\
Model: %s\n\
IRQ: %s\n\
\n\
%s", 945},
  {"<Command>", 946},
  {"Specify an HTML browser for the on-line help", 947},
  {"Never confirm quitting VICE", 948},
  {"Never save settings on exit", 949},
  {"Install a private colormap", 950},
  {"Use the default colormap", 951},
  {"<value>", 952},
  {"Specify X display depth (1..32)", 953},
  {"Disable fullscreen", 954},
  {"Desktop", 955},
  {"VICE Information", 956},
  {"File name", 957},
  {"Browse", 958},
  {"Cancel", 959},
  {"Save empty disk file", 960},
  {"Couldn't create disk image", 961},
  {"Disk format:", 962},
  {"Save screenshot file", 963},
  {"Image Format", 964},
  {"Screen Snapshot", 965},
  {"\
Name: %s\n\
Tune: %d of %d (Default: %d)\n\
Author: %s\n\
Copyright: %s\n\
%s\n\
Model: %s\n\
IRQ: %s\n\
%s", 966},
  {" emulator", 967},
  {"Do you really want to exit?", 968},
  {"Save the current settings?", 969},
  {"VICE Error!", 970},
  {"Extend disk image", 971},
  {"Aspect ratio", 972},
  {"Custom aspect ratio", 973},
  {"Call `XSync()' after updating the emulation window", 974},
  {"Do not call `XSync()' after updating the emulation window", 975},
  {"Use shared memory", 976},
  {"Never use shared memory (slower)", 977},
  {"<fourcc>", 978},
  {"Request YUV FOURCC format", 979},
  {"<Aspect ratio>", 980},
  {"Set aspect ratio (0.5 - 2.0)", 981},
  {"Enable true aspect ratio", 982},
  {"Disable true aspect ratio", 983},
  {"Keep aspect ratio when scaling", 984},
  {"Do not keep aspect ratio when scaling (freescale)", 985},
  {"MITSHM extensions version %d.%d detected.", 986},
  {"MITSHM initialization succeed.\n", 987},
  {"Set HID A device", 988},
  {"Set X Axis for HID A device", 989},
  {"Set Y Axis for HID A device", 990},
  {"Set Buttons for HID A device", 991},
  {"Set Auto Fire Buttons for HID A device", 992},
  {"Set X Axis Threshold in Percent of HID A device", 993},
  {"Set Y Axis Threshold in Percent of HID A device", 994},
  {"Set HID B device", 995},
  {"Set X Axis for HID B device", 996},
  {"Set Y Axis for HID B device", 997},
  {"Set Buttons for HID B device", 998},
  {"Set Auto Fire Buttons for HID B device", 999},
  {"Set X Axis Threshold in Percent of HID B device", 1000},
  {"Set Y Axis Threshold in Percent of HID B device", 1001},
  {"Set Hat Switch for Joystick of HID A device", 1002},
  {"Set Hat Switch for Joystick of HID B device", 1003},
  {"Set device for joystick port 1", 1004},
  {"Set device for joystick port 2", 1005},
  {"Set device for extra joystick port 1", 1006},
  {"Set device for extra joystick port 2", 1007},
  {"Name of MIDI Client", 1008},
  {"Name of MIDI-In Port", 1009},
  {"Name of MIDI-Out Port", 1010},
  {"Set scaling factor for mouse movement along X", 1011},
  {"Set scaling factor for mouse movement along Y", 1012},
  {"Enable draw synchronization to vertical blank", 1013},
  {"Set number of buffers used for sync draw (0=use default)", 1014},
  {"Enable flicker fixing in sync draw", 1015},
  {"Disable flicker fixing in sync draw", 1016},
  {"View", 1017},
  {"Window", 1018},
  {"OK", 1019},
  {"VICE Question", 1020},
  {"Your ffmpeg dll version doesn't match.", 1021},
  {"DirectDraw error: Code:%8x Error:%s", 1022},
  {"Cannot load settings.", 1023},
  {"Default settings restored.", 1024},
  {"Cannot attach specified file", 1025},
  {"\
%s\n\
\n\
Start monitor? (No will reset, cancel will continue)", 1026},
  {"VICE CPU JAM", 1027},
  {"Do you want to extend the image?", 1028},
  {"Detached device %s", 1029},
  {"Attached %s to device#%s", 1030},
  {"Detached tape", 1031},
  {"History recorded with unknown release", 1032},
  {"History recorded with VICE-%s", 1033},
  {"paused", 1034},
  {"frame #", 1035},
  {"resumed", 1036},
  {"\
Do you really want to exit?\n\
\n\
All the data present in the emulated RAM will be lost.", 1037},
  {"\
TFE/RR-Net support is not available on your system,\n\
there is some important part missing. Please have a\n\
look at the VICE knowledge base support page\n\
\n\
      http://vicekb.trikaliotis.net/13-005\n\
\n\
for possible reasons and to activate networking with VICE.", 1038},
  {"TFE/RR-Net support", 1039},
  {"Cannot autostart specified file.", 1040},
  {"Attached tape %s", 1041},
  {"Settings loaded successfully.", 1042},
  {"Autostart disk/tape image", 1043},
  {"Bad cartridge config in UI!", 1044},
  {"Logging console output image", 1045},
  {"VICE console logging files (*.dbg)", 1046},
  {"Cannot write log file `%s'.", 1047},
  {"Cannot read flip list file", 1048},
  {"Cannot write flip list file", 1049},
  {"Select keymap file", 1050},
  {"Save keymap file", 1051},
  {"Cannot write keymap file", 1052},
  {"Save config file", 1053},
  {"Load config file", 1054},
  {"Mapping", 1055},
  {"Attach", 1056},
  {"Please enter a filename.", 1057},
  {"Overwrite existing image?", 1058},
  {"Cannot create image file!", 1059},
  {"Command line options", 1060},
  {"Which command line options are available?", 1061},
  {"No driver selected or selected driver not supported", 1062},
  {"Cannot write screenshot file `%s'.", 1063},
  {"Autostart disk image", 1064},
  {"Select file system directory", 1065},
  {"Printer Userport", 1066},
  {"Printer 4", 1067},
  {"Printer 5", 1068},
  {"Printer 6", 1069},
  {"Device 7", 1070},
  {"Drive 8", 1071},
  {"Drive 9", 1072},
  {"Drive 10", 1073},
  {"Drive 11", 1074},
  {"Peripheral settings", 1075},
  {"Can't write snapshot file.", 1076},
  {"Cannot read snapshot image", 1077},
  {"Load %s ROM image", 1078},
  {"Computer", 1079},
  {"Drive", 1080},
  {"Cannot write snapshot file `%s'.", 1081},
  {"Could not load palette file.", 1082},
  {"Load VICE palette file", 1083},
  {"Fullscreen/DirectX", 1084},
  {"Video settings", 1085},
  {"File system", 1086},
  {"Real IEC device", 1087},
  {"RS232 device %i", 1088},
  {"Attach CRT cartridge image", 1089},
  {"Attach raw 32KB Action Replay cartridge image", 1090},
  {"Attach raw 16KB Action Replay MK3 cartridge image", 1091},
  {"Attach raw 32KB Action Replay MK4 cartridge image", 1092},
  {"Attach raw 16KB Stardos cartridge image", 1093},
  {"Attach raw 32KB Atomic Power cartridge image", 1094},
  {"Attach raw 8KB Epyx FastLoad cartridge image", 1095},
  {"Attach IEEE-488 Interface cartridge image", 1096},
  {"Attach raw 64KB Retro Replay cartridge image", 1097},
  {"Attach raw 512kB MMC Replay cartridge image", 1098},
  {"Attach raw 64KB IDE64 cartridge image", 1099},
  {"Attach raw 32KB Super Snapshot V4 cartridge image", 1100},
  {"Attach raw 64KB Super Snapshot V5 cartridge image", 1101},
  {"Attach raw Structured Basic cartridge image", 1102},
  {"Select cartridge file", 1103},
  {"Select start snapshot for event history", 1104},
  {"Select end snapshot for event history", 1105},
  {"Version %s *UNSTABLE* (%s)", 1106},
  {"Version %s rev %s *UNSTABLE* (%s)", 1107},
  {"Version %s (%s)", 1108},
  {"Version %s rev %s (%s)", 1109},
  {"VICE contributors", 1110},
  {"Who made what?", 1111},
  {"VICE compile time features", 1112},
  {"What compile time features are available?", 1113},
  {"VICE is distributed WITHOUT ANY WARRANTY!", 1114},
  {"Press key for NorthWest", 1115},
  {"Press key for North", 1116},
  {"Press key for NorthEast", 1117},
  {"Press key for East", 1118},
  {"Press key for SouthEast", 1119},
  {"Press key for South", 1120},
  {"Press key for SouthWest", 1121},
  {"Press key for West", 1122},
  {"Press key for Fire", 1123},
  {"No userport joy adapter", 1124},
  {"Disable SID cartridge joystick", 1125},
  {"Enable SID cartridge joystick", 1126},
  {"Numpad + RCtrl", 1127},
  {"All buttons used as fire", 1128},
  {"numeric (see above)", 1129},
  {"No button - Autofire disabled", 1130},
  {"All files (*.*)", 1131},
  {"VICE palette files (*.vpl)", 1132},
  {"VICE snapshot files (*.vsf)", 1133},
  {"\
CBM files (*.d64;*.d71;*.d80;*.d81;*.d82;*.d1m;*.d2m;*.d4m;*.g64;*.g41;*.p64;\
*.x64;*.t64;*.tap;*.prg;*.p00)", 1134},
  {"IDE64 files (*.fdd;*.hdd;*.iso;*.cfa)", 1135},
  {"\
Disk image files (*.d64;*.d71;*.d80;*.d81;*.d82;*.d1m;*.d2m*;*.d4m;.g64;*.\
g41;*.p64;*.x64)", 1136},
  {"Tape image files (*.t64;*.tap)", 1137},
  {"\
Zipped files (*.zip;*.bz2;*.gz;*.d6z;*.d7z;*.d8z;*.g6z;*.g4z;*.p6z;*.x6z)", 1138},
  {"CRT cartridge image files (*.crt)", 1139},
  {"Raw cartridge image files (*.bin)", 1140},
  {"VICE flip list files (*.vfl)", 1141},
  {"VICE romset files (*.vrs)", 1142},
  {"VICE romset archives (*.vra)", 1143},
  {"VICE keymap files (*.vkm)", 1144},
  {"Commodore emulator files (*.prg;*.p00)", 1145},
  {"Sound driver: DirectX", 1146},
  {"Sound driver: WMM", 1147},
  {"\
Media files (*.bmp;*.gif;*.iff;*.jpg;*.pcx;*.png;*.ppm;*.wav;*.mp3;*.avi;*.\
mpg)", 1148},
  {" kB", 1149},
  {"Configure Keyset A", 1150},
  {"Configure Keyset B", 1151},
  {"%s at %d%% speed, %d fps%s", 1152},
  {"Tape", 1153},
  {"Joystick", 1154},
  {"\
Recording\n\
%02d:%02d", 1155},
  {"\
Playback\n\
%02d:%02d (%02d:%02d)", 1156},
  {"number", 1157},
  {"\
Set input device for joystick #1 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Joystick 1, 5: joystick 2)", 1158},
  {"\
Set input device for joystick #2 (0: None, 1: Numpad, 2: Keyset 1, 3: Keyset \
2, 4: Joystick 1, 5: joystick 2)", 1159},
  {"\
Set input device for extra joystick #1 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Joystick 1, 5: joystick 2)", 1160},
  {"\
Set input device for extra joystick #2 (0: None, 1: Numpad, 2: Keyset 1, 3: \
Keyset 2, 4: Joystick 1, 5: joystick 2)", 1161},
  {"Use all CPUs on SMP systems", 1162},
  {"Use only first CPU on SMP systems", 1163},
  {"Enable vertical blank sync", 1164},
  {"Disable vertical blank sync", 1165},
  {"Enable always on top", 1166},
  {"Disable always on top", 1167},
  {"aspect ratio", 1168},
  {"Set aspect ratio", 1169},
  {"Specify initial default directory.", 1170},
  {"Specify initial tape directory.", 1171},
  {"Specify initial disk directory.", 1172},
  {"Specify initial autostart directory.", 1173},
  {"Specify initial cartridge directory.", 1174},
  {"Specify initial snapshot directory.", 1175},
  {"Start VICE in fullscreen mode", 1176},
  {"Do not start VICE in fullscreen mode", 1177},
  {"Disable DirectX9 video driver", 1178},
  {"Enable DirectX9 video driver", 1179},
  {"Enable rendering to DirectX primary surface", 1180},
  {"Disable rendering to DirectX primary surface", 1181},
  {"Specify fullscreen device", 1182},
  {"An unexpected error occured. Received signal %d (%s).", 1183},
  {"An unexpected error occured. Received signal %d.", 1184},
  {"An error occured starting the server.", 1185},
  {"An error occured connecting the client.", 1186},
  {"Sound Recording stopped", 1187},
  {"Error saving EasyFlash crt file", 1188},
  {"No EasyFlash cartridge inserted", 1189},
  {"Datasette settings", 1190},
  {"Speed of motor while reading", 1191},
  {"cycle(s) additional delay each trigger", 1192},
  {"Use IEC Device", 1193},
  {"Directory", 1194},
  {"Autostart", 1195},
  {"Attach read only", 1196},
  {"Read P00 files", 1197},
  {"Write P00 files", 1198},
  {"Select fire button", 1199},
  {"Auto fire button settings", 1200},
  {"Autofire speed", 1201},
  {"Calibrate Joystick(s)", 1202},
  {"Extra joystick settings", 1203},
  {"South West", 1204},
  {"South", 1205},
  {"South East", 1206},
  {"West", 1207},
  {"East", 1208},
  {"North West", 1209},
  {"North", 1210},
  {"North East", 1211},
  {"Fire button", 1212},
  {"Configure Sound Device Settings", 1213},
  {"DirectX driver", 1214},
  {"WMM driver", 1215},
  {"Sound output mode", 1216},
  {"Sound Buffer Size", 1217},
  {"Sound Fragment Size", 1218},
  {"Synchronization Method", 1219},
  {"Bitdepth", 1220},
  {"Resolution", 1221},
  {"VBLANK synchronization", 1222},
  {"Render to DX Primary surface", 1223},
  {"Value %.3f for %s is out of range, using %.3f instead", 1224},
  {"Value %d for %s is out of range, using %d instead", 1225},
  {"Audio leak", 1226},
  {"VICII Palette", 1227},
  {"VIC Palette", 1228},
  {"CRTC Palette", 1229},
  {"VDC Palette", 1230},
  {"TED Palette", 1231},
  {"VICII Colors", 1232},
  {"VIC Colors", 1233},
  {"CRTC Colors", 1234},
  {"VDC Colors", 1235},
  {"TED Colors", 1236},
  {"VICII CRT emulation", 1237},
  {"VIC CRT emulation", 1238},
  {"CRTC CRT emulation", 1239},
  {"VDC CRT emulation", 1240},
  {"TED CRT emulation", 1241},
  {"VICII Render filter", 1242},
  {"VIC Render filter", 1243},
  {"CRTC Render filter", 1244},
  {"VDC Render filter", 1245},
  {"TED Render filter", 1246},
  {"VICII Audio leak", 1247},
  {"VIC Audio leak", 1248},
  {"CRTC Audio leak", 1249},
  {"VDC Audio leak", 1250},
  {"TED Audio leak", 1251},
  {"VICII Renderer", 1252},
  {"VIC Renderer", 1253},
  {"CRTC Renderer", 1254},
  {"VDC Renderer", 1255},
  {"TED Renderer", 1256},
  {"External Palette", 1257},
  {"Initialization at powerup", 1258},
  {"Value of first byte", 1259},
  {"Length of constant values", 1260},
  {"Length of constant pattern", 1261},
  {"Printer emulation", 1262},
  {"Send Formfeed", 1263},
  {"File system printer", 1264},
  {"Printer driver", 1265},
  {"Output", 1266},
  {"Output to file #", 1267},
  {"Output file #1 name", 1268},
  {"Output file #2 name", 1269},
  {"Output file #3 name", 1270},
  {"Custom speed", 1271},
  {"Enter custom speed [%]", 1272},
  {"RS232 device 1", 1273},
  {"RS232 device 2", 1274},
  {"RS232 device 3", 1275},
  {"RS232 device 4", 1276},
  {"Server Bind", 1277},
  {"Append log to existing file", 1278},
  {"Image Contents", 1279},
  {"New Image", 1280},
  {"ID", 1281},
  {"Create Image", 1282},
  {"New TAP Image", 1283},
  {"Select Driver", 1284},
  {"FFMPEG settings", 1285},
  {"bitrate", 1286},
  {"Sound record settings", 1287},
  {"Sound Record Format", 1288},
  {"Sound Record File", 1289},
  {"Kernal", 1290},
  {"SCPU64", 1291},
  {"Basic", 1292},
  {"Character", 1293},
  {"Symbolic", 1294},
  {"Positional", 1295},
  {"Dump keyset", 1296},
  {"Dump shortcuts", 1297},
  {"Symbolic US", 1298},
  {"Symbolic DE", 1299},
  {"Gr Sym.", 1300},
  {"Gr Pos.", 1301},
  {"UK Sym.", 1302},
  {"UK Pos.", 1303},
  {"DE Sym.", 1304},
  {"DE Pos.", 1305},
  {"Memory", 1306},
  {"Drive type", 1307},
  {"40 track handling", 1308},
  {"Idle method", 1309},
  {"Standard", 1310},
  {"Drive expansion", 1311},
  {"$2000-$3FFF RAM", 1312},
  {"$4000-$5FFF RAM", 1313},
  {"$6000-$7FFF RAM", 1314},
  {"$8000-$9FFF RAM", 1315},
  {"$A000-$BFFF RAM", 1316},
  {"Professional DOS", 1317},
  {"SuperCard+", 1318},
  {"Save RTC data when changed", 1319},
  {"Default CPU JAM action", 1320},
  {"Mode", 1321},
  {"Options", 1322},
  {"Mouse settings", 1323},
  {"Drive sync factor", 1324},
  {"Cartridge/IO settings", 1325},
  {"Language", 1326},
  {"Help", 1327},
  {"Exit", 1328},
  {"Sound playback", 1329},
  {"Smart-attach image", 1330},
  {"CRT image", 1331},
  {"Generic 8KB image", 1332},
  {"Generic 16KB image", 1333},
  {"Action Replay image", 1334},
  {"Action Replay MK3 image", 1335},
  {"Action Replay MK4 image", 1336},
  {"Stardos image", 1337},
  {"Atomic Power image", 1338},
  {"Epyx FastLoad image", 1339},
  {"IEEE-488 Interface image", 1340},
  {"Retro Replay image", 1341},
  {"MMC Replay image", 1342},
  {"Super Snapshot V4 image", 1343},
  {"Super Snapshot V5 image", 1344},
  {"Structured BASIC image", 1345},
  {"Start", 1346},
  {"Reset Counter", 1347},
  {"Monitor", 1348},
  {"History Autoplay", 1349},
  {"Load quicksnapshot image", 1350},
  {"Save quicksnapshot image", 1351},
  {"Start/Stop Recording History", 1352},
  {"Start/Stop Playback History", 1353},
  {"Overwrite Playback", 1354},
  {"Select History files/directory", 1355},
  {"Save/stop media file", 1356},
  {"Warp mode", 1357},
  {"Always on Top", 1358},
  {"Use only first CPU", 1359},
  {"Reset IEC with CPU", 1360},
  {"Enable Joy Keys", 1361},
  {"Virtual device traps", 1362},
  {"C64 model settings", 1363},
  {"Userport joystick settings", 1364},
  {"Sidcart joystick settings", 1365},
  {"REU settings", 1366},
  {"GEO-RAM settings", 1367},
  {"RamCart settings", 1368},
  {"Double Quick Brown Box settings", 1369},
  {"Expert Cartridge settings", 1370},
  {"ISEPIC settings", 1371},
  {"MMC64 settings", 1372},
  {"MMC Replay settings", 1373},
  {"Retro Replay settings", 1374},
  {"Magic Voice settings", 1375},
  {"MIDI settings", 1376},
  {"DigiMAX settings", 1377},
  {"DS12C887 RTC settings", 1378},
  {"Lightpen settings", 1379},
  {"IDE64 settings", 1380},
  {"Ethernet settings", 1381},
  {"ACIA settings", 1382},
  {"RS232 userport settings", 1383},
  {"EasyFlash settings", 1384},
  {"SFX Sound Expander settings", 1385},
  {"Enable the SFX Sound Sampler cartridge", 1386},
  {"Userport RTC expansion settings", 1387},
  {"Save current settings to specified file", 1388},
  {"Load settings from specified file", 1389},
  {"Save current settings", 1390},
  {"Load saved settings", 1391},
  {"Set default settings", 1392},
  {"English", 1393},
  {"Danish", 1394},
  {"Spanish", 1395},
  {"Hungarian", 1396},
  {"Korean", 1397},
  {"Dutch", 1398},
  {"Polish", 1399},
  {"Russian", 1400},
  {"Turkish", 1401},
  {"Fullscreen", 1402},
  {"SID cart settings", 1403},
  {"Open", 1404},
  {"Print", 1405},
  {"Exit        Alt+F4", 1406},
  {"Stop Debug", 1407},
  {"Stop Execution", 1408},
  {"Step into", 1409},
  {"Step over", 1410},
  {"Step until return", 1411},
  {"Go to cursor", 1412},
  {"Evaluate", 1413},
  {"Current instruction", 1414},
  {"Evaluation window", 1415},
  {"Register window", 1416},
  {"Memory window", 1417},
  {"Disassembly window", 1418},
  {"Console window", 1419},
  {"Cascade", 1420},
  {"Tile vertically", 1421},
  {"Tile horizontally", 1422},
  {"Arrange icons", 1423},
  {"IRQ", 1424},
  {"NMI", 1425},
  {"Swiftlink", 1426},
  {"Turbo232", 1427},
  {"Enable the ACIA RS232 interface emulation", 1428},
  {"ACIA location", 1429},
  {"ACIA mode", 1430},
  {"Random delay", 1431},
  {"Handle true drive emulation", 1432},
  {"Select file for PRG autostart disk", 1433},
  {"VDC revision", 1434},
  {"Select Internal Function ROM file", 1435},
  {"Select External Function ROM file", 1436},
  {"RAM banks", 1437},
  {"C128 settings", 1438},
  {"Kernal Int.", 1439},
  {"Kernal DE", 1440},
  {"Kernal FI", 1441},
  {"Kernal FR", 1442},
  {"Kernal IT", 1443},
  {"Kernal NO", 1444},
  {"Kernal SE", 1445},
  {"Kernal CH", 1446},
  {"Basic LO", 1447},
  {"Basic HI", 1448},
  {"Char. Int.", 1449},
  {"Char. DE", 1450},
  {"Char. FR", 1451},
  {"Char. SE", 1452},
  {"Char. CH", 1453},
  {"Kernal C64", 1454},
  {"Basic C64", 1455},
  {"Internal Function ROM", 1456},
  {"External Function ROM", 1457},
  {"Save Internal Function RTC data when changed", 1458},
  {"Enable RAM banks 2 and 3", 1459},
  {"IEEE488 Interface emulation", 1460},
  {"C128 model settings", 1461},
  {"6569 (PAL)", 1462},
  {"8565 (PAL)", 1463},
  {"6567 (NTSC)", 1464},
  {"8562 (NTSC)", 1465},
  {"6572 (PAL-N)", 1466},
  {"C64 drive burst modification settings", 1467},
  {"Enable the C64 drive burst modification", 1468},
  {"C64 drive burst modification CIA", 1469},
  {"C64 PAL", 1470},
  {"C64C PAL", 1471},
  {"C64 NTSC", 1472},
  {"C64C NTSC", 1473},
  {"Drean", 1474},
  {"C64 SX PAL", 1475},
  {"C64 SX NTSC", 1476},
  {"C64 GS", 1477},
  {"PET64 PAL", 1478},
  {"PET64 NTSC", 1479},
  {"Memory expansion hacks settings", 1480},
  {"DTV ROM image File", 1481},
  {"Attach DTV Flash Image", 1482},
  {"DTV ROM", 1483},
  {"C64DTV settings", 1484},
  {"C64DTV model", 1485},
  {"Enable Hummer ADC", 1486},
  {"Create DTV Flash Image", 1487},
  {"DTV ROM Creation", 1488},
  {"Copy C64 ROMS into image", 1489},
  {"Create", 1490},
  {"C64DTV model settings", 1491},
  {"Attach flash rom image", 1492},
  {"Detach flash rom image", 1493},
  {"True flash filesystem", 1494},
  {"Memory expansion hack device", 1495},
  {"Select file for C64 256K", 1496},
  {"+60K base address", 1497},
  {"Select file for +60K", 1498},
  {"Select file for +256K", 1499},
  {"Model line", 1500},
  {"128 kByte", 1501},
  {"256 kByte", 1502},
  {"512 kByte", 1503},
  {"1024 kByte", 1504},
  {"Attach cartridge image at $1000", 1505},
  {"Attach cartridge image at $2000/$3000", 1506},
  {"Attach cartridge image at $4000/$5000", 1507},
  {"Attach cartridge image at $6000/$7000", 1508},
  {"Load new Cart $1***", 1509},
  {"Unload Cart $1***", 1510},
  {"Load new Cart $2-3***", 1511},
  {"Unload Cart $2-3***", 1512},
  {"Load new Cart $4-5***", 1513},
  {"Unload Cart $4-5***", 1514},
  {"Load new Cart $6-7***", 1515},
  {"Unload Cart $6-7***", 1516},
  {"CBM2 settings", 1517},
  {"CBM2 model", 1518},
  {"CBM2 model settings", 1519},
  {"CBM5x0 settings", 1520},
  {"64 kByte", 1521},
  {"CBM5x0 model", 1522},
  {"CBM5x0 model settings", 1523},
  {"CIA settings", 1524},
  {"Enable the DigiMAX cartridge", 1525},
  {"DigiMAX base", 1526},
  {"Select file for DQBB", 1527},
  {"Enable Double Quick Brown Box", 1528},
  {"Save DQBB image when changed", 1529},
  {"Enable the DS12C887 RTC expansion", 1530},
  {"Start with running oscillator", 1531},
  {"DS12C887 RTC base", 1532},
  {"EasyFlash jumper", 1533},
  {"Save CRT on detach", 1534},
  {"Save CRT now", 1535},
  {"Select file for Expert Cartridge", 1536},
  {"Enable the Expert Cartridge", 1537},
  {"Save Expert Cartridge image when changed", 1538},
  {"Select file for GEO-RAM", 1539},
  {"Enable the GEO-RAM expansion unit", 1540},
  {"GEO-RAM size", 1541},
  {"Save GEO-RAM image when changed", 1542},
  {"IDE64 V4 settings", 1543},
  {"IDE64 primary master device settings", 1544},
  {"IDE64 primary slave device settings", 1545},
  {"IDE64 secondary master device settings", 1546},
  {"IDE64 secondary slave device settings", 1547},
  {"Enable IDE64 V4", 1548},
  {"Enable IDE64 USB server", 1549},
  {"Save IDE64 RTC data when changed", 1550},
  {"ATA device image file", 1551},
  {"Geometry", 1552},
  {"Total size: %iKB", 1553},
  {"Select ATA device image file", 1554},
  {"IDE64 USB Server address to bind to", 1555},
  {"Select file for ISEPIC", 1556},
  {"Enable the ISEPIC cartridge", 1557},
  {"ISEPIC switch", 1558},
  {"Save ISEPIC image when changed", 1559},
  {"ISEPIC file", 1560},
  {"Enable Magic Voice", 1561},
  {"Select file for Magic Voice", 1562},
  {"Enable MIDI emulation", 1563},
  {"MIDI type", 1564},
  {"Enable the MMC64 expansion", 1565},
  {"BIOS Revision", 1566},
  {"Enable BIOS Flash Jumper", 1567},
  {"Save BIOS when changed", 1568},
  {"BIOS File", 1569},
  {"MMC/SD Image read-only", 1570},
  {"MMC/SD Image File", 1571},
  {"Rescue mode", 1572},
  {"read/write", 1573},
  {"Save MMC Replay EEPROM when changed", 1574},
  {"sensitivity", 1575},
  {"Sensitivity of the mouse.", 1576},
  {"Mouse sensitivity", 1577},
  {"Save Smart Mouse RTC data when changed", 1578},
  {"Input/Output", 1579},
  {"PET settings", 1580},
  {"Editor", 1581},
  {"ROM 9", 1582},
  {"ROM A", 1583},
  {"ROM B", 1584},
  {"Video", 1585},
  {"IO Size", 1586},
  {"256 Byte", 1587},
  {"2 kByte", 1588},
  {"IO Settings", 1589},
  {"$9*** as RAM", 1590},
  {"$A*** as RAM", 1591},
  {"PET Colour board settings", 1592},
  {"PET DWW settings", 1593},
  {"PET REU settings", 1594},
  {"Enable PET High Res Emulation board", 1595},
  {"Enable Userport DAC for sound output", 1596},
  {"PET model settings", 1597},
  {"Analog", 1598},
  {"Background color", 1599},
  {"Enable the PET DWW hi-res board", 1600},
  {"Select file for PET DWW", 1601},
  {"Enable the PET Ram and Expansion Unit", 1602},
  {"PET REU size", 1603},
  {"Select file for PET REU", 1604},
  {"Plus4 settings", 1605},
  {"Attach cartridge image for Cartridge0 Low", 1606},
  {"Attach cartridge image for Cartridge0 High", 1607},
  {"Attach cartridge image for Cartridge1 Low", 1608},
  {"Attach cartridge image for Cartridge1 High", 1609},
  {"Attach cartridge image for Cartridge2 Low", 1610},
  {"Attach cartridge image for Cartridge2 High", 1611},
  {"Function Lo", 1612},
  {"Function Hi", 1613},
  {"16 kByte", 1614},
  {"32 kByte", 1615},
  {"256 kByte (CSORY)", 1616},
  {"256 kByte (HANNES)", 1617},
  {"1024 kByte (HANNES)", 1618},
  {"4096 kByte (HANNES)", 1619},
  {"Plus4 model", 1620},
  {"C0 low  image", 1621},
  {"C0 high image", 1622},
  {"C1 low  image", 1623},
  {"C1 high image", 1624},
  {"C2 low  image", 1625},
  {"C2 high image", 1626},
  {"V364 Speech settings", 1627},
  {"Plus4 model settings", 1628},
  {"enable Digiblaster", 1629},
  {"Enable the RamCart expansion", 1630},
  {"RamCart size", 1631},
  {"Save to RamCart image when changed", 1632},
  {"Select file for RamCart", 1633},
  {"Enable RR flash jumper", 1634},
  {"Enable RR bank jumper", 1635},
  {"Save RR flash when changed", 1636},
  {"REU Settings", 1637},
  {"Enable the RAM Expansion Unit", 1638},
  {"REU size", 1639},
  {"Save REU image when changed", 1640},
  {"Select file for REU", 1641},
  {"Enable RS232 userport emulation", 1642},
  {"Userport device", 1643},
  {"Userport baud rate", 1644},
  {"SuperCPU64 settings", 1645},
  {"SIMM size", 1646},
  {"Enable the jiffy switch", 1647},
  {"Enable the speed switch", 1648},
  {"General", 1649},
  {"Extra SID chips", 1650},
  {"Amount of extra SID chips", 1651},
  {"Second SID at", 1652},
  {"Third SID at", 1653},
  {"reSID options", 1654},
  {"Sample method", 1655},
  {"Passband", 1656},
  {"Gain", 1657},
  {"Filter bias", 1658},
  {"Device selection", 1659},
  {"Left/Main device", 1660},
  {"Right device", 1661},
  {"Enable the SID cartridge", 1662},
  {"HardSID device selection", 1663},
  {"Main device", 1664},
  {"Enable the digiblaster add-on", 1665},
  {"Enable the SFX Sound Expander cartridge", 1666},
  {"SFX Sound Sampler settings", 1667},
  {"Normal borders", 1668},
  {"Full borders", 1669},
  {"Debug borders", 1670},
  {"No borders", 1671},
  {"Ethernet", 1672},
  {"Userport RTC settings", 1673},
  {"Enable the Userport RTC expansion", 1674},
  {"Enable the v364 speech add-on", 1675},
  {"V364 Speech ROM file", 1676},
  {"Select ROM file for V364 Speech", 1677},
  {"VIC20 settings", 1678},
  {"Full (blocks 0/1/2/3/5)", 1679},
  {"Select generic cartridge image", 1680},
  {"Select Mega-Cart image", 1681},
  {"Select Final Expansion image", 1682},
  {"Select Vic Flash Plugin image", 1683},
  {"Enable MasC=uerade I/O swap", 1684},
  {"VIC20 model", 1685},
  {"VIC-1112 IEEE-488 module", 1686},
  {"Generic image", 1687},
  {"Mega-Cart image", 1688},
  {"Final Expansion image", 1689},
  {"Vic Flash Plugin image", 1690},
  {"4/8/16KB image at $2000", 1691},
  {"4/8/16KB image at $4000", 1692},
  {"4/8/16KB image at $6000", 1693},
  {"4/8KB image at $A000", 1694},
  {"4KB image at $B000", 1695},
  {"Enable Final Expansion write back to ROM file", 1696},
  {"Enable Vic Flash Plugin write back to ROM file", 1697},
  {"Enable Mega-Cart NvRAM writeback", 1698},
  {"Select Mega-Cart non-volatile RAM file", 1699},
  {"VIC20 model settings", 1700},
  {"Sprite Collisions", 1701},
  {"Select PSID file", 1702},
  {"Tune number", 1703},
  {"Select tune", 1704},
  {"Next tune", 1705},
  {"Previous tune", 1706},
  {"CPU JAM action settings", 1707},
  {"Function low  image (3plus1)", 1708},
  {"Function high image (3plus1)", 1709},
  {"Netplay (experimental)", 1710},
  {"1/1", 1711},
  {"1/2", 1712},
  {"1/3", 1713},
  {"1/4", 1714},
  {"1/5", 1715},
  {"1/6", 1716},
  {"1/7", 1717},
  {"1/8", 1718},
  {"1/9", 1719},
  {"1/10", 1720},
  {"200%", 1721},
  {"100%", 1722},
  {"50%", 1723},
  {"20%", 1724},
  {"10%", 1725},
  {"Vertical stretch", 1726},
  {"Drive sound emulation settings", 1727},
  {"PAL", 1728},
  {"NTSC", 1729},
  {"PAL-G", 1730},
  {"NTSC-M", 1731},
  {"Custom C64 model", 1732},
  {"C16 PAL", 1733},
  {"C16 NTSC", 1734},
  {"Plus4 PAL", 1735},
  {"Plus4 NTSC", 1736},
  {"V364 NTSC", 1737},
  {"C232 NTSC", 1738},
  {"VIC20 PAL", 1739},
  {"VIC20 NTSC", 1740},
  {"VIC21", 1741},
  {"C64DTV V2 PAL", 1742},
  {"C64DTV V2 NTSC", 1743},
  {"C64DTV V3 PAL", 1744},
  {"C64DTV V3 NTSC", 1745},
  {"Hummer NTSC", 1746},
  {"C128 PAL", 1747},
  {"C128DCR PAL", 1748},
  {"C128 NTSC", 1749},
  {"C128DCR NTSC", 1750},
  {"2001", 1751},
  {"3008", 1752},
  {"3016", 1753},
  {"3032", 1754},
  {"3032B", 1755},
  {"4016", 1756},
  {"4032", 1757},
  {"4032B", 1758},
  {"8032", 1759},
  {"8096", 1760},
  {"8296", 1761},
  {"SuperPET", 1762},
  {"CBM610 PAL", 1763},
  {"CBM610 NTSC", 1764},
  {"CBM620 PAL", 1765},
  {"CBM620 NTSC", 1766},
  {"CBM620+ PAL", 1767},
  {"CBM620+ NTSC", 1768},
  {"CBM710 NTSC", 1769},
  {"CBM720 NTSC", 1770},
  {"CBM720+ NTSC", 1771},
  {"CBM510 PAL", 1772},
  {"CBM510 NTSC", 1773},
  {"VICII video settings", 1774},
  {"VIC video settings", 1775},
  {"VDC video settings", 1776},
  {"CRTC video settings", 1777},
  {"TED video settings", 1778},
  {"Palette settings", 1779},
  {"Render filter settings", 1780},
  {"Joystick device selection", 1781},
  {"Joystick fire button selection", 1782},
  {"Computer ROM settings", 1783},
  {"Drive ROM settings", 1784},
  {"PLUS256K file", 1785},
  {"Select file for PLUS256K", 1786},
  {"Enable the Userport RTC", 1787},
  {"Enable saving the Userport RTC data", 1788},
  {"Drive burst modification settings", 1789},
  {"Enable PET High Res Emulator board", 1790},
  {"Fullscreen Statusbar", 1791},
  {"Video overlay", 1792},
  {"Start Sound Record", 1793},
  {"Media", 1794},
  {"Value %d out of range, range is from %d to %d, using %d instead", 1795},
  {"Value %.3f out of range, range is from %.3f to %.3f, using %.3f instead", 1796},
  {"VICE Message", 1797},
  {"Which compile time features are available?", 1798},
  {"The device on this port is not a gamepad", 1799},
  {"The port is not mapped to an Amiga port", 1800},
  {"This machine may not have a SID", 1801},
  {"Screenshot save of %s failed", 1802},
  {"Screenshot %s saved.", 1803},
  {"Press desired key/button, move stick or press ESC for no key.", 1804},
  {"Choose screenshot format", 1805},
  {"Save %s screenshot", 1806},
  {"Detached device %d", 1807},
  {"Attached %s to device#%d", 1808},
  {"Yes|No", 1809},
  {"Parent", 1810},
  {"Disabled", 1811},
  {"Enabled", 1812},
  {"Dolphin Dos 3", 1813},
  {"Formel64", 1814},
  {"Filesystem", 1815},
  {"Raw", 1816},
  {"256K base address", 1817},
  {"256K file", 1818},
  {"Select file for 256K", 1819},
  {"Select file for C64DTV ROM", 1820},
  {"Writes to C64DTV ROM", 1821},
  {"RAM size", 1822},
  {"RAM Block $0400-$0FFF", 1823},
  {"RAM Block $0800-$0FFF", 1824},
  {"RAM Block $1000-$1FFF", 1825},
  {"RAM Block $2000-$3FFF", 1826},
  {"RAM Block $4000-$5FFF", 1827},
  {"RAM Block $6000-$7FFF", 1828},
  {"RAM Block $A000-$BFFF", 1829},
  {"RAM Block $C000-$CFFF", 1830},
  {"Additional Delay", 1831},
  {"Enable FD2000/4000 RTC data saving", 1832},
  {"Expert Cartridge mode", 1833},
  {"Select config file", 1834},
  {"Joystick in SIDcart joystick port", 1835},
  {"Joy Port 0", 1836},
  {"Joy Port 1", 1837},
  {"Joy Port 2", 1838},
  {"Joy Port 3", 1839},
  {"Stop/Blue", 1840},
  {"Select/Red", 1841},
  {"Repeat/Yellow", 1842},
  {"Shuffle/Green", 1843},
  {"Forward/Charcoal", 1844},
  {"Reverse/Charcoal", 1845},
  {"Play-Pause/Grey", 1846},
  {"Joy 1 Device", 1847},
  {"Joy 2 Device", 1848},
  {"Userport Joy 1 Device", 1849},
  {"Userport Joy 2 Device", 1850},
  {"SIDcart Joy Device", 1851},
  {"Joy 1 Fire", 1852},
  {"Joy 2 Fire", 1853},
  {"Userport Joy 1 Fire", 1854},
  {"Userport Joy 2 Fire", 1855},
  {"SIDcart Joy Fire", 1856},
  {"\
Joystick #1 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)", 1857},
  {"\
Joystick #2 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)", 1858},
  {"\
Extra joystick #1 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset \
B/AI)", 1859},
  {"\
Extra joystick #2 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset \
B/AI)", 1860},
  {"Joystick #1 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)", 1861},
  {"Joystick #2 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)", 1862},
  {"Extra joystick #1 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)", 1863},
  {"Extra joystick #2 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)", 1864},
  {"Enable fullscreen.", 1865},
  {"Disable fullscreen.", 1866},
  {"Enable statusbar.", 1867},
  {"Disable statusbar.", 1868},
  {"Enable video overlay.", 1869},
  {"Disable video overlay.", 1870},
  {"RGBI", 1871},
  {"PET Colour settings", 1872},
  {"Select file for V364 Speech", 1873},
  {"PLUS60K base address", 1874},
  {"PLUS60K file", 1875},
  {"Select file for PLUS60K", 1876},
  {"RamCart Read/Write", 1877},
  {"Save RamCart image when changed", 1878},
  {"VICII palette file", 1879},
  {"VIC palette file", 1880},
  {"VDC palette file", 1881},
  {"CRTC palette file", 1882},
  {"TED palette file", 1883},
  {"Printer #4 output type", 1884},
  {"Printer #5 output type", 1885},
  {"Printer #6 output type", 1886},
  {"Userport printer output type", 1887},
  {"Printer #4 output device", 1888},
  {"Printer #5 output device", 1889},
  {"Printer #6 output device", 1890},
  {"Userport printer output device", 1891},
  {"Send formfeed to printer #4", 1892},
  {"Send formfeed to printer #5", 1893},
  {"Send formfeed to printer #6", 1894},
  {"Send formfeed to userport printer", 1895},
  {"Printer device #1 output", 1896},
  {"Printer device #2 output", 1897},
  {"Printer device #3 output", 1898},
  {"IEC emulation for printer #4", 1899},
  {"IEC emulation for printer #5", 1900},
  {"IEC emulation for printer #6", 1901},
  {"IEC emulation for device #7", 1902},
  {"Userport RS232", 1903},
  {"SID Stereo", 1904},
  {"Amount of extra sids", 1905},
  {"Stereo SID at", 1906},
  {"Triple SID at", 1907},
  {"Not implemented yet!", 1908},
  {"Speed Adjustment", 1909},
  {"HD image file", 1910},
  {"Select HD image file", 1911},
  {"IDE64 V4", 1912},
  {"USB Server", 1913},
  {"USB Server address to bind to", 1914},
  {"Enable saving of the IDE64 RTC data", 1915},
  {"BIOS Flash Jumper", 1916},
  {"Bank jumper", 1917},
  {"Select BIOS file", 1918},
  {"Select MMC/SD image file", 1919},
  {"Select EEPROM file", 1920},
  {"Select card image file", 1921},
  {"Card read/write", 1922},
  {"Save EEPROM image when changed", 1923},
  {"EEPROM read/write", 1924},
  {"SID engine and model", 1925},
  {"SID engine", 1926},
  {"snapshot file", 1927},
  {"Select snapshot file", 1928},
  {"Select External Palette file", 1929},
  {"External VICII palette", 1930},
  {"External VIC palette", 1931},
  {"External TED palette", 1932},
  {"External VDC palette", 1933},
  {"External CRTC palette", 1934},
  {"Text", 1935},
  {"CRTC chip", 1936},
  {"Current Model", 1937},
  {"PET Model", 1938},
  {"RAM banks 2 & 3", 1939},
  {"Enable Internal Function RTC data saving", 1940},
  {"Enable External Function RTC data saving", 1941},
  {"Select ROM file", 1942},
  {"DigiMAX Enabled", 1943},
  {"Drive sound enabled", 1944},
  {"Drive sound settings", 1945},
  {"DS12C887 RTC Enabled", 1946},
  {"Enable DS12C887 RTC data saving", 1947},
  {"SFX Sound Expander Enabled", 1948},
  {"SFX Sound Expander Chip", 1949},
  {"SFX Sound Sampler Enabled", 1950},
  {"Jiffy switch enabled", 1951},
  {"Speed switch enabled", 1952},
  {"Select Sound Record File", 1953},
  {"Volume (0-100%)", 1954},
  {"Enable Smart Mouse RTC saving", 1955},
  {"1351 mouse", 1956},
  {"NEOS mouse", 1957},
  {"Amiga mouse", 1958},
  {"Atari CX-22 trackball", 1959},
  {"Atari ST mouse", 1960},
  {"Smart mouse", 1961},
  {"MicroMys mouse", 1962},
  {"Koalapad", 1963},
  {"Save to EasyFlash CRT file on detach", 1964},
  {"Save to EasyFlash CRT now", 1965},
  {"Reset IEC bus with computer", 1966},
  {"CIA model settings", 1967},
  {"Select SID file to load", 1968},
  {"Cannot load snapshot file.", 1969},
  {"Playback error: %s different from line %d of file debug%06d", 1970},
  {"Cannot write image file %s", 1971},
  {"Cannot find mapped name for %s", 1972},
  {"Could not create start snapshot file %s.", 1973},
  {"Error reading end snapshot file %s.", 1974},
  {"Could not create end snapshot file %s.", 1975},
  {"Could not open end snapshot file %s.", 1976},
  {"Could not find event section in end snapshot file.", 1977},
  {"Error reading start snapshot file. Tried %s and %s", 1978},
  {"Error reading start snapshot file.", 1979},
  {"Sorry. Multiple recording is not supported.", 1980},
  {"write to sound device failed.", 1981},
  {"Cannot open SID engine", 1982},
  {"Cannot initialize SID engine", 1983},
  {"initialization failed for device `%s'.", 1984},
  {"device '%s' not found or not supported.", 1985},
  {"Recording device %s doesn't exist!", 1986},
  {"Recording device must be different from playback device", 1987},
  {"Warning! Recording device %s seems to be a realtime device!", 1988},
  {"The recording device doesn't support current sound parameters", 1989},
  {"Sound buffer overflow (cycle based)", 1990},
  {"Sound buffer overflow.", 1991},
  {"cannot flush.", 1992},
  {"fragment problems.", 1993},
  {"running too slow.", 1994},
  {"store to sounddevice failed.", 1995},
  {"Testing best frame delay", 1996},
  {"Using %d frames delay.", 1997},
  {"Cannot load snapshot file for transfer", 1998},
  {"Sending snapshot to client", 1999},
  {"Cannot send snapshot to client", 2000},
  {"Cannot create snapshot file %s", 2001},
  {"Cannot open snapshot file %s", 2002},
  {"Server is waiting for a client", 2003},
  {"Cannot create snapshot file. Select different history directory!", 2004},
  {"Cannot resolve %s", 2005},
  {"Cannot connect to %s (no server running on port %d).", 2006},
  {"Receiving snapshot from server", 2007},
  {"Network out of sync - disconnecting.", 2008},
  {"Remote host disconnected.", 2009},
  {"Remote host suspending", 2010},
  {"ffmpegdrv: Cannot open video stream", 2011},
  {"ffmpegdrv: Cannot open audio stream", 2012},
  {"ffmpegdrv: Cannot open %s", 2013},
  {"I/O read collision at %X from ", 2014},
  {" and ", 2015},
  {"\
.\n\
All the named devices will be detached.", 2016},
  {"\
.\n\
All devices except ", 2017},
  {" will be detached.", 2018},
  {"No filename!", 2019},
  {"Illegal filename!", 2020},
  {"Error creating file %s!", 2021},
  {"Error writing to file %s!", 2022},
  {"DTV ROM image created successfully", 2023},
  {"Command `%s' unknown.\n", 2024},
  {"No help available for `%s'\n", 2025},
  {"\
\n\
Syntax: %s %s\n", 2026},
  {"Abbreviation: %s\n", 2027},
  {"Available commands are", 2028},
  {"Machine state commands", 2029},
  {"memspace", 2030},
  {"bankname", 2031},
  {"\
If bankname is not given, print the possible banks for the memspace.\n\
If bankname is given set the current bank in the memspace to the given\n\
bank.", 2032},
  {"\
Print JSR call chain (most recent call first). Stack offset\n\
relative to SP+1 is printed in parentheses. This is a best guess\n\
only.", 2033},
  {"Specify the type of CPU currently used (6502/z80).", 2034},
  {"count", 2035},
  {"Show <count> last executed commands.", 2036},
  {"filename", 2037},
  {"\
Write a snapshot of the machine into the file specified.\n\
This snapshot is compatible with a snapshot written out by the UI.\n\
Note: No ROM images are included into the dump.", 2038},
  {"address", 2039},
  {"Change the PC to ADDRESS and continue execution", 2040},
  {"Print out the I/O area of the emulated machine.", 2041},
  {"Print out list of attached expansion port devices.", 2042},
  {"\
Advance to the next instruction.  Subroutines are treated as\n\
a single instruction.", 2043},
  {"reg_name", 2044},
  {"\
Assign respective registers.  With no parameters, display register\n\
values.", 2045},
  {"Reset the machine or drive. Type: 0 = soft, 1 = hard, 8-11 = drive.", 2046},
  {"\
Continues execution and returns to the monitor just before the next\n\
RTS or RTI is executed.", 2047},
  {"Displays the contents of the screen.", 2048},
  {"\
Single-step through instructions.  COUNT allows stepping\n\
more than a single instruction at a time.", 2049},
  {"\
Print the CPU cycle counter of the current device. 'reset' sets the counter \
to 0.", 2050},
  {"Read a snapshot of the machine from the file specified.", 2051},
  {"Symbol table commands", 2052},
  {"label", 2053},
  {"\
<memspace> is one of: C: 8: 9: 10: 11:\n\
<address>  is the address which should get the label.\n\
<label>    is the name of the label; it must start with a dot (\".\").\n\
\n\
Map a given address to a label.  This label can be used when entering\n\
assembly code and is shown during disassembly.  Additionally, it can\n\
be used whenever an address must be specified.", 2054},
  {"\
<memspace> is one of: C: 8: 9: 10: 11:\n\
<label>    is the name of the label; it must start with a dot (\".\").\n\
\n\
Delete a previously defined label.", 2055},
  {"\
Load a file containing a mapping of labels to addresses.  If no memory\n\
space is specified, the default readspace is used.\n\
\n\
The format of the file is the one written out by the `save_labels' command;\n\
it consists of some `add_label' commands, written one after the other.", 2056},
  {"\
Save labels to a file.  If no memory space is specified, all of the\n\
labels are saved.", 2057},
  {"\
Display current label mappings.  If no memory space is specified, show\n\
all labels.", 2058},
  {"Assembler and memory commands", 2059},
  {"data_list", 2060},
  {"Write the specified data at `address'.", 2061},
  {"instruction", 2062},
  {"\
Assemble instructions to the specified address.  If only one\n\
instruction is specified, enter assembly mode (enter an empty line to\n\
exit assembly mode).", 2063},
  {"address_range", 2064},
  {"\
Compare memory from the source specified by the address range to the\n\
destination specified by the address.  The regions may overlap.  Any\n\
values that miscompare are displayed using the default displaytype.", 2065},
  {"checknum", 2066},
  {"\
Delete checkpoint `checknum'. If no checkpoint is specified delete all \
checkpoints.", 2067},
  {"\
Disassemble instructions.  If two addresses are specified, they are\n\
used as a start and end address.  If only one is specified, it is\n\
treated as the start address and a default number of instructions are\n\
disassembled.  If no addresses are specified, a default number of\n\
instructions are disassembled from the dot address.", 2068},
  {"\
Fill memory in the specified address range with the data in\n\
<data_list>.  If the size of the address range is greater than the size\n\
of the data_list, the data_list is repeated.", 2069},
  {"\
Hunt memory in the specified address range for the data in\n\
<data_list>.  If the data is found, the starting address of the match\n\
is displayed.  The entire range is searched for all possible matches.", 2070},
  {"address_opt_range", 2071},
  {"Display memory contents as PETSCII text.", 2072},
  {"Display memory contents as screen code text.", 2073},
  {"data_type", 2074},
  {"\
Display the contents of memory.  If no datatype is given, the default\n\
is used.  If only one address is specified, the length of data\n\
displayed is based on the datatype.  If no addresses are given, the\n\
'dot' address is used.\n\
Please note: due to the ambiguous meaning of 'b' and 'd' these data-\n\
types must be given in uppercase!", 2075},
  {"\
Display the contents of memory as character data.  If only one address\n\
is specified, only one character is displayed.  If no addresses are\n\
given, the ``dot'' address is used.", 2076},
  {"\
Save the memmap as a picture. Format is:\n\
0 = BMP, 1 = PCX, 2 = PNG, 3 = GIF, 4 = IFF.", 2077},
  {"mask", 2078},
  {"\
Show the memmap. The mask can be specified to show only those\n\
locations with accesses of certain type(s). The mask is a number\n\
with the bits \"ioRWXrwx\", where RWX are for ROM and rwx for RAM.\n\
Optionally, an address range can be specified.", 2079},
  {"Clear the memmap.", 2080},
  {"\
Display the contents of memory as sprite data.  If only one address is\n\
specified, only one sprite is displayed.  If no addresses are given,\n\
the ``dot'' address is used.", 2081},
  {"\
Move memory from the source specified by the address range to\n\
the destination specified by the address.  The regions may overlap.", 2082},
  {"Checkpoint commands", 2083},
  {"cond_expr", 2084},
  {"\
Set a breakpoint, If no address is given, the currently valid break-\n\
points are printed.\n\
If an address is given, a breakpoint is set for that address and the\n\
breakpoint number is printed.\n\
`load|store|exec' is either `load', `store' or `exec' (or any combina-\n\
tion of these) to specify on which operation the monitor breaks. If\n\
not specified, the monitor breaks on `exec'.\n\
A conditional expression can also be specified for the breakpoint.\n\
For more information on conditions, see the CONDITION command.", 2085},
  {"\
Specify `command' as the command to execute when checkpoint `checknum'\n\
is hit.  Note that the `x' command is not yet supported as a\n\
command argument.", 2086},
  {"\
Each time the specified checkpoint is examined, the condition is\n\
evaluated. If it evalutes to true, the checkpoint is activated.\n\
Otherwise, it is ignored. If registers are specified in the expression,\n\
the values used are those at the time the checkpoint is examined, not\n\
when the condition is set.\n\
The condition can use registers (A, X, Y, PC, SP, FL and other cpu\n\
specific registers (see manual)) and compare them (==, !=, <, >, <=, >=)\n\
against other registers or constants.\n\
Registers can be the registers of other devices; this is denoted by\n\
a memspace prefix (i.e., c:, 8:, 9:, 10:, 11:\n\
Examples: A == 0, X == Y, 8:X == X)\n", 2087},
  {"\
Disable checkpoint `checknum'. If no checkpoint is given all checkpoints \
will be disabled.", 2088},
  {"\
Enable checkpoint `checknum'. If no checkpoint is given all checkpoints will \
be enabled.", 2089},
  {"\
Ignore a checkpoint a given number of crossings.  If no count is given,\n\
the default value is 1.", 2090},
  {"\
If no address is given, the currently valid breakpoints are printed.\n\
If an address is given, a temporary breakpoint is set for that address\n\
and the breakpoint number is printed.  Control is returned to the\n\
emulator by this command.  The breakpoint is deleted once it is hit.", 2091},
  {"\
Set a watchpoint. If no address is given, the currently valid watch-\n\
points are printed. If a single address is specified, set a watchpoint\n\
for that address.  If two addresses are specified, set a watchpoint\n\
for the memory locations between the two addresses.\n\
`load|store|exec' is either `load', `store' or `exec' (or any combina-\n\
tion of these) to specify on which operation the monitor breaks. If\n\
not specified, the monitor breaks on `load' and `store'.\n", 2092},
  {"\
Set a tracepoint. If no address is given, the currently valid trace-\n\
points are printed. If a single address is specified, set a tracepoint\n\
for that address.  If two addresses are specified, set a tracepoint\n\
for the memory locations between the two addresses.\n\
`load|store|exec' is either `load', `store' or `exec' (or any combina-\n\
tion of these) to specify on which operation the monitor breaks. If\n\
not specified, the monitor traces all three operations.\n", 2093},
  {"Monitor state commands", 2094},
  {"\
Set the default memory device to either the computer `c:' or the\n\
specified disk drive (`8:', `9:').", 2095},
  {"Leave the monitor and return to execution.", 2096},
  {"Exit the emulator immediately.", 2097},
  {"\
Set the default radix to hex, decimal, octal, or binary.  With no\n\
argument, the current radix is printed.", 2098},
  {"\
Control how monitor generated reads affect memory locations that have\n\
read side-effects.  If the argument is 'on' then reads may cause\n\
side-effects.  If the argument is 'off' then reads don't cause\n\
side-effects.  If the argument is 'toggle' then the current mode is\n\
switched.  No argument displays the current state.", 2099},
  {"Disk commands", 2100},
  {"disk command", 2101},
  {"\
Perform a disk command on the currently attached disk image on drive 8.\n\
The specified disk command is sent to the drive's channel #15.", 2102},
  {"device", 2103},
  {"file_index", 2104},
  {"autostart a given disk/tape image or program", 2105},
  {"autoload given disk/tape image or program", 2106},
  {"Attach file to device. (device 32 = cart)", 2107},
  {"\
Load the specified file into memory at the specified address.\n\
If device is 0, the file is read from the file system.", 2108},
  {"track", 2109},
  {"sector", 2110},
  {"\
Read the block at the specified track and sector.  If an address is\n\
specified, the data is loaded into memory.  If no address is given, the\n\
data is displayed using the default datatype.", 2111},
  {"\
Save the memory from address1 to address2 to the specified file.\n\
If device is 0, the file is written to the file system.", 2112},
  {"\
Write a block of data at `address' on the specified track and sector\n\
of disk in drive 8.", 2113},
  {"Change current working directory.", 2114},
  {"Detach file from device. (device 32 = cart)", 2115},
  {"Display the directory contents.", 2116},
  {"List disk contents.", 2117},
  {"\
Load the specified file into memory at the specified address. Set BASIC\n\
pointers appropriately if loaded into computer memory (not all emulators).\n\
Use (otherwise ignored) two-byte load address from file if no address\n\
specified.\n\
If device is 0, the file is read from the file system.", 2118},
  {"Show current working directory.", 2119},
  {"\
Save the memory from address1 to address2 to the specified file.\n\
Write two-byte load address.\n\
If device is 0, the file is written to the file system.", 2120},
  {"Other commands", 2121},
  {"Display the specified number in decimal, hex, octal and binary.", 2122},
  {"Use cartridge freeze.", 2123},
  {"\
If no argument is given, prints out a list of all available commands\n\
If an argument is given, prints out specific help for that command.", 2124},
  {"string", 2125},
  {"Put the specified string into the keyboard buffer.", 2126},
  {"\
Monitor commands from the specified file are read and executed.  This\n\
command stops at the end of file or when a STOP command is read.", 2127},
  {"expression", 2128},
  {"Evaluate the specified expression and output the result.", 2129},
  {"\
After this command, all commands entered are written to the specified\n\
file until the STOP command is entered.", 2130},
  {"resource", 2131},
  {"Displays the value of the resource.", 2132},
  {"value", 2133},
  {"Sets the value of the resource.", 2134},
  {"Loads resources from file.", 2135},
  {"Saves resources to file.", 2136},
  {"Stop recording commands.  See `record'.", 2137},
  {"\
Take a screenshot. Format is:\n\
default = BMP, 1 = PCX, 2 = PNG, 3 = GIF, 4 = IFF.", 2138},
  {"\
Control the datasette. Valid commands:\n\
0 = stop, 1 = start, 2 = forward, 3 = rewind, 4 = record,\n\
5 = reset, 6 = reset counter.", 2139},
  {"Enable opposite joystick directions", 2140},
  {"Disable opposite joystick directions", 2141},
  {"Enable keyset", 2142},
  {"Disable keyset", 2143},
  {"On autostart, load to BASIC start (without ',1')", 2144},
  {"On autostart, load with ',1'", 2145},
  {"On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'", 2146},
  {"On autostart, do not use the 'RUN' command with a colon; i.e., 'RUN'", 2147},
  {"Do not handle True Drive Emulation on autostart", 2148},
  {"Enable warp mode during autostart", 2149},
  {"Disable warp mode during autostart", 2150},
  {"\
Set autostart mode for PRG files (0: VirtualFS, 1: Inject, 2: Disk image)", 2151},
  {"Set disk image for autostart of PRG files", 2152},
  {"Set initial autostart delay (0: use default)", 2153},
  {"Enable random initial autostart delay.", 2154},
  {"Disable random initial autostart delay.", 2155},
  {"\
Set action on CPU JAM: (0: Ask, 1: continue, 2: Monitor, 3: Reset, 4: Hard \
Reset, 5: Quit Emulator)", 2156},
  {"Use PAL sync factor", 2157},
  {"Use NTSC sync factor", 2158},
  {"Use PAL-N sync factor", 2159},
  {"Burst modification (0 = None, 1 = CIA1, 2 = CIA2)", 2160},
  {"Computer reset goes to IEC bus (0 = No, 1 = Yes)", 2161},
  {"Specify name of international Kernal ROM image", 2162},
  {"Specify name of German Kernal ROM image", 2163},
  {"Specify name of Finnish Kernal ROM image", 2164},
  {"Specify name of French Kernal ROM image", 2165},
  {"Specify name of Italian Kernal ROM image", 2166},
  {"Specify name of Norwegian Kernal ROM image", 2167},
  {"Specify name of Swedish Kernal ROM image", 2168},
  {"Specify name of Swiss Kernal ROM image", 2169},
  {"Specify name of BASIC ROM image (lower part)", 2170},
  {"Specify name of BASIC ROM image (higher part)", 2171},
  {"Specify name of international character generator ROM image", 2172},
  {"Specify name of German character generator ROM image", 2173},
  {"Specify name of French character generator ROM image", 2174},
  {"Specify name of Swedish character generator ROM image", 2175},
  {"Specify name of C64 mode Kernal ROM image", 2176},
  {"Specify name of C64 mode BASIC ROM image", 2177},
  {"Enable the OEM userport joystick adapter", 2178},
  {"Disable the OEM userport joystick adapter", 2179},
  {"Enable the IEEE488 interface emulation", 2180},
  {"Disable the IEEE488 interface emulation", 2181},
  {"\
Patch the Kernal ROM to the specified <revision> (1: rev. 1, 2: rev. 2, 3: \
rev. 3, 67/sx: sx64, 100/4064: 4064)", 2182},
  {"Disable the ACIA RS232 interface emulation", 2183},
  {"interrupt", 2184},
  {"Set the ACIA interrupt (0: None, 1: NMI, 2: IRQ)", 2185},
  {"Set the ACIA mode (0: Normal, 1: Swiftlink, 2: Turbo232)", 2186},
  {"Set the base address of the ACIA cartridge", 2187},
  {"Enable the ACIA emulation", 2188},
  {"Disable the ACIA emulation", 2189},
  {"Specify index of keymap file (0=symbol, 1=positional)", 2190},
  {"Specify name of symbolic keymap file", 2191},
  {"Specify name of positional keymap file", 2192},
  {"Activate 40 column mode", 2193},
  {"Activate 80 column mode", 2194},
  {"Always switch to C128 mode on reset", 2195},
  {"Specify name of internal Function ROM image", 2196},
  {"Specify name of external Function ROM image", 2197},
  {"Type of internal Function ROM: (0: None, 1: ROM, 2: RAM, 3: RTC)", 2198},
  {"Type of external Function ROM: (0: None, 1: ROM, 2: RAM, 3: RTC)", 2199},
  {"Enable saving of the internal function RTC data when changed.", 2200},
  {"Disable saving of the internal function RTC data when changed.", 2201},
  {"Enable saving of the external function RTC data when changed.", 2202},
  {"Disable saving of the external function RTC data when changed.", 2203},
  {"Use old NTSC sync factor", 2204},
  {"Set both CIA models (0 = old 6526, 1 = new 6526A)", 2205},
  {"Set CIA 1 model (0 = old 6526, 1 = new 6526A)", 2206},
  {"Set CIA 2 model (0 = old 6526, 1 = new 6526A)", 2207},
  {"\
Set C64 model (c64/c64c/c64old, ntsc/newntsc/oldntsc, drean, jap, c64gs, \
pet64, ultimax)", 2208},
  {"\
Set C64 model (c64/c64c/c64old, ntsc/newntsc/oldntsc, drean, jap, c64gs)", 2209},
  {"Set C128 model (c128/c128dcr, pal/ntsc)", 2210},
  {"\
Set C128 machine type (0: International, 1: Finnish, 2: French, 3: German, \
4: Italian, 5: Norwegian, 6: Swedish, 7: Swiss)", 2211},
  {"Disable RAM banks 2 and 3", 2212},
  {"\
Set Plus4 model (c16/c16pal/c16ntsc, plus4/plus4pal/plus4ntsc, v364/cv364, \
c232)", 2213},
  {"Set VIC20 model (vic20/vic20pal/vic20ntsc, vic21)", 2214},
  {"Set DTV model (v2/v2pal/v2ntsc, v3/v3pal/v3ntsc, hummer)", 2215},
  {"Specify name of Kernal ROM image", 2216},
  {"Specify name of SCPU64 ROM image", 2217},
  {"Specify name of BASIC ROM image", 2218},
  {"Specify name of character generator ROM image", 2219},
  {"Specify index of keymap file (0=sym, 1=symDE, 2=pos)", 2220},
  {"Specify name of symbolic German keymap file", 2221},
  {"Set glue logic type (0 = discrete, 1 = 252535-01)", 2222},
  {"Disable Hummer ADC", 2223},
  {"\
Select the way the I/O collisions should be handled, (0: error message and \
detach all involved carts, 1: error message and detach last attached \
involved carts, 2: warning in log and 'AND' the valid return values", 2224},
  {"specify IEEE488 interface image name", 2225},
  {"Disable the GEO-RAM expansion unit", 2226},
  {"Specify name of GEORAM image", 2227},
  {"Allow writing to GEORAM image", 2228},
  {"Do not write to GEORAM image", 2229},
  {"\
Swap io mapping (map cart I/O-1 to VIC20 I/O-3 and cart I/O-2 to VIC20 I/O-2)", 2230},
  {"\
Don't swap io mapping (map cart I/O-1 to VIC20 I/O-2 and cart I/O-2 to VIC20 \
I/O-3)", 2231},
  {"Swap io mapping (map cart I/O to VIC20 I/O-2)", 2232},
  {"Don't swap io mapping (map cart I/O to VIC20 I/O-3)", 2233},
  {"size in KB", 2234},
  {"size", 2235},
  {"clock", 2236},
  {"Size of the GEORAM expansion unit", 2237},
  {"Disable the PET Ram and Expansion Unit", 2238},
  {"Specify name of PET Ram and Expansion Unit image", 2239},
  {"Size of the PET Ram and Expansion Unit. (128/512/1024/2048)", 2240},
  {"Specify name of PET DWW image", 2241},
  {"Disable the PET DWW hi-res board", 2242},
  {"Disable Userport DAC for sound output", 2243},
  {"Enable Userport joystick adapter", 2244},
  {"Disable Userport joystick adapter", 2245},
  {"\
Set Userport joystick adapter type (0: CGA/Protovision, 1: PET, 2: Hummer, \
3: OEM, 4: DXS/HIT, 5: Kingsoft, 6: Starbyte)", 2246},
  {"Enable Userport RTC", 2247},
  {"Disable Userport RTC", 2248},
  {"Enable saving of the Userport RTC data when changed.", 2249},
  {"Disable saving of the Userport RTC data when changed.", 2250},
  {"Override PSID settings for Video standard and SID model", 2251},
  {"Specify PSID tune <number>", 2252},
  {"Disable the RamCart expansion", 2253},
  {"Specify name of RAMCART image", 2254},
  {"Allow writing to RAMCart image", 2255},
  {"Do not write to RAMCart image", 2256},
  {"Set the RAMCart switch to read-only", 2257},
  {"Set the RAMCart switch to read/write", 2258},
  {"Size of the RAMCART expansion. (64/128)", 2259},
  {"Disable Double Quick Brown Box", 2260},
  {"Specify Double Quick Brown Box filename", 2261},
  {"Allow writing to DQBB image", 2262},
  {"Do not write to DQBB image", 2263},
  {"Disable the ISEPIC cartridge", 2264},
  {"Enable the ISEPIC switch", 2265},
  {"Disable the ISEPIC switch", 2266},
  {"Set ISEPIC image name", 2267},
  {"Allow writing to ISEPIC image", 2268},
  {"Do not write to ISEPIC image", 2269},
  {"Specify name of Magic Voice ROM image", 2270},
  {"Enable the Magic Voice cartridge", 2271},
  {"Disable the Magic Voice cartridge", 2272},
  {"Disable the MMC64 expansion", 2273},
  {"Specify name of MMC64 BIOS image", 2274},
  {"Specify name of MMC64 image", 2275},
  {"Specify MMC64 revision (0: Rev A, 1: Rev B)", 2276},
  {"Specify MMC64 SD type (0: auto, 1: MMC, 2: SD, 3: SDHC)", 2277},
  {"Set the MMC64 card to read-only", 2278},
  {"Set the MMC64 card to read/write", 2279},
  {"Save the MMC64 bios when changed", 2280},
  {"Do not save the MMC64 bios when changed", 2281},
  {"Set the MMC64 Flash Jumper", 2282},
  {"Remove the MMC64 Flash Jumper", 2283},
  {"Specify MMC Replay card image filename", 2284},
  {"Specify MMC Replay SD type (0: auto, 1: MMC, 2: SD, 3: SDHC)", 2285},
  {"Enable writes to MMC Replay card image", 2286},
  {"Disable writes to MMC Replay card image", 2287},
  {"Specify MMC Replay EEPROM image filename", 2288},
  {"Disable writes to MMC Replay EEPROM image", 2289},
  {"Enable MMC Replay rescue mode", 2290},
  {"Disable MMC Replay rescue mode", 2291},
  {"Allow writing to MMC Replay image", 2292},
  {"Do not write to MMC Replay image", 2293},
  {"Enable saving of the RR ROM at exit", 2294},
  {"Disable saving of the RR ROM at exit", 2295},
  {"Set RR Bank Jumper", 2296},
  {"Unset RR Bank Jumper", 2297},
  {"Set RR Flash Jumper", 2298},
  {"Set RR Revision (0: Retro Replay, 1: Nordic Replay)", 2299},
  {"Disable the RAM Expansion Unit", 2300},
  {"Specify name of REU image", 2301},
  {"Allow writing to REU image", 2302},
  {"Do not write to REU image", 2303},
  {"Size of the RAM expansion unit. (128/256/512/1024/2048/4096/8192/16384)", 2304},
  {"Enable the TFE (\"The Final Ethernet\") unit", 2305},
  {"Disable the TFE (\"The Final Ethernet\") unit", 2306},
  {"Set the system ethernet interface for TFE emulation", 2307},
  {"Enable RRNet mode of TFE emulation", 2308},
  {"Disable RRNet mode of TFE emulation", 2309},
  {"Reset machine if a cartridge is attached or detached", 2310},
  {"Do not reset machine if a cartridge is attached or detached", 2311},
  {"Attach generic 16kB Ultimax cartridge image", 2312},
  {"Attach raw 16kB Action Replay MK2 cartridge image", 2313},
  {"Attach raw 8kB Capture cartridge image", 2314},
  {"Attach raw 64kB Comal 80 cartridge image", 2315},
  {"Attach raw Dela EP256 cartridge image", 2316},
  {"Attach raw Dela EP64 cartridge image", 2317},
  {"Attach raw Dela EP7x8 cartridge image", 2318},
  {"Attach raw 128kB Dinamic cartridge image", 2319},
  {"Attach raw 8kB Diashow-Maker cartridge image", 2320},
  {"Attach raw 16kB Double Quick Brown Box cartridge image", 2321},
  {"Attach raw EasyFlash cartridge image", 2322},
  {"Attach raw 8kB REX Utility cartridge image", 2323},
  {"Attach raw 4kB Snapshot 64 cartridge image", 2324},
  {"Attach raw 8kB EXOS cartridge image", 2325},
  {"Attach raw 8kB Expert Cartridge image", 2326},
  {"Attach raw 32kB Formel 64 image", 2327},
  {"Attach raw 16kB Final Cartridge image", 2328},
  {"Attach raw 64kB Final Cartridge III image", 2329},
  {"Attach raw 32kB Final Cartridge Plus image", 2330},
  {"Attach raw 8kB Freeze Frame image", 2331},
  {"Attach raw 32kB Freeze Machine image", 2332},
  {"Attach raw 128kB Fun Play/Power Play cartridge image", 2333},
  {"Attach raw 2kB ISEPIC cartridge image", 2334},
  {"Attach raw 16kB KCS Power cartridge image", 2335},
  {"Attach raw 24kB Kingsoft cartridge image", 2336},
  {"Attach raw 8kB MACH 5 cartridge image", 2337},
  {"Attach raw 32/64/128kB Magic Desk cartridge image", 2338},
  {"Attach raw Magic Formel cartridge image", 2339},
  {"Attach raw 8kB Mikro Assembler cartridge image", 2340},
  {"Attach raw 8kB MMC64 cartridge image", 2341},
  {"Attach raw 16kB Magic Voice cartridge image", 2342},
  {"Attach raw Ocean cartridge image", 2343},
  {"Attach raw 16KB Westermann Learning cartridge image", 2344},
  {"Attach raw 8kB Warp Speed cartridge image", 2345},
  {"Attach raw 16kB Zaxxon cartridge image", 2346},
  {"Attach raw 64KB Pagefox cartridge image", 2347},
  {"Attach raw 256KB Prophet 64 cartridge image", 2348},
  {"Attach raw RamCart cartridge image", 2349},
  {"Attach raw REU cartridge image", 2350},
  {"Attach raw REX EP256 cartridge image", 2351},
  {"Attach raw 64kB RGCD cartridge image", 2352},
  {"Attach raw 16/32kB ROSS cartridge image", 2353},
  {"Attach raw 8KB Game Killer cartridge image", 2354},
  {"Attach raw GEO-RAM cartridge image", 2355},
  {"Attach raw 512kB Game System cartridge image", 2356},
  {"Disable the Expert Cartridge", 2357},
  {"Set Expert Cartridge image name", 2358},
  {"Set Expert Cartridge mode (0: Off, 1: Prg, 2: On)", 2359},
  {"Allow writing to Expert Cartridge image", 2360},
  {"Do not write to Expert Cartridge image", 2361},
  {"Disable default cartridge", 2362},
  {"Specify name of IDE64 image file", 2363},
  {"Set number of cylinders for the IDE64 emulation.", 2364},
  {"Set number of heads for the IDE64 emulation.", 2365},
  {"Set number of sectors for the IDE64 emulation.", 2366},
  {"Do not autodetect geometry of formatted images", 2367},
  {"Emulate version 4 hardware", 2368},
  {"Emulate pre version 4 hardware", 2369},
  {"Disable IDE64 USB server", 2370},
  {"IDE64 USB server address", 2371},
  {"Enable saving of IDE64 RTC data when changed.", 2372},
  {"Disable saving of IDE64 RTC data when changed.", 2373},
  {"modelnumber", 2374},
  {"Specify CBM-II model to emulate. (610, 620, 620+, 710, 720, 720+)", 2375},
  {"Specify CBM-II model to emulate. (510)", 2376},
  {"Specify to use VIC-II", 2377},
  {"Specify to use CRTC", 2378},
  {"linenumber", 2379},
  {"Specify CBM-II model hardware (0=6x0, 1=7x0)", 2380},
  {"Specify size of RAM (64/128/256/512/1024 kByte)", 2381},
  {"Specify size of RAM (128/256/512/1024 kByte)", 2382},
  {"Specify name of cartridge ROM image for $1000", 2383},
  {"Specify name of cartridge ROM image for $2000-$3fff", 2384},
  {"Specify name of cartridge ROM image for $4000-$5fff", 2385},
  {"Specify name of cartridge ROM image for $6000-$7fff", 2386},
  {"Enable RAM mapping in $0800-$0FFF", 2387},
  {"Disable RAM mapping in $0800-$0FFF", 2388},
  {"Enable RAM mapping in $1000-$1FFF", 2389},
  {"Disable RAM mapping in $1000-$1FFF", 2390},
  {"Enable RAM mapping in $2000-$3FFF", 2391},
  {"Disable RAM mapping in $2000-$3FFF", 2392},
  {"Enable RAM mapping in $4000-$5FFF", 2393},
  {"Disable RAM mapping in $4000-$5FFF", 2394},
  {"Enable RAM mapping in $6000-$7FFF", 2395},
  {"Disable RAM mapping in $6000-$7FFF", 2396},
  {"Enable RAM mapping in $C000-$CFFF", 2397},
  {"Disable RAM mapping in $C000-$CFFF", 2398},
  {"\
Specify index of keymap file (0: UK business symbolic, 1: UK business \
positional, 2: Graphics symbolic, 3: Graphics positional, 4: German business \
symbolic, 5: German business positional)", 2399},
  {"Specify name of graphics keyboard symbolic keymap file", 2400},
  {"Specify name of graphics keyboard positional keymap file", 2401},
  {"Specify name of UK business keyboard symbolic keymap file", 2402},
  {"Specify name of UK business keyboard positional keymap file", 2403},
  {"Specify name of German business keyboard symbolic keymap file", 2404},
  {"Specify name of German business keyboard positional keymap file", 2405},
  {"Enable hardware-level emulation of disk drives", 2406},
  {"Disable hardware-level emulation of disk drives", 2407},
  {"Enable sound emulation of disk drives", 2408},
  {"Disable sound emulation of disk drives", 2409},
  {"Set volume for disk drive sound emulation (0-4000)", 2410},
  {"Set drive type (0: no drive", 2411},
  {"method", 2412},
  {"color", 2413},
  {"\
Select the way the oversized input should be handled, (0: scale down, 1: \
crop left top, 2: crop center top,  3: crop right top, 4: crop left center, \
5: crop center, 6: crop right center, 7: crop left bottom, 8: crop center \
bottom, 9:  crop right bottom)", 2414},
  {"\
Select the way the undersized input should be handled, (0: scale up, 1: \
borderize)", 2415},
  {"\
Select the way the multicolor to hires should be handled, (0: b&w, 1: 2 \
colors, 2: 4 colors, 3: gray scale,  4: best cell colors)", 2416},
  {"\
Select the way the TED luminosity should be handled, (0: ignore, 1: dither)", 2417},
  {"Select the CRTC text color (0: white, 1: amber, 2: green)", 2418},
  {"Set drive 40 track extension policy (0: never, 1: ask, 2: on access)", 2419},
  {"Specify name of 1540 DOS ROM image", 2420},
  {"Specify name of 1541 DOS ROM image", 2421},
  {"Specify name of 1541-II DOS ROM image", 2422},
  {"Specify name of 1570 DOS ROM image", 2423},
  {"Specify name of 1571 DOS ROM image", 2424},
  {"Specify name of 1581 DOS ROM image", 2425},
  {"Specify name of 2000 DOS ROM image", 2426},
  {"Specify name of 4000 DOS ROM image", 2427},
  {"Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)", 2428},
  {"Enable saving of FD2000/4000 RTC data when changed.", 2429},
  {"Disable saving of FD2000/4000 RTC data when changed.", 2430},
  {"Enable 8KB RAM expansion at $2000-$3FFF", 2431},
  {"Disable 8KB RAM expansion at $2000-$3FFF", 2432},
  {"Enable 8KB RAM expansion at $4000-$5FFF", 2433},
  {"Disable 8KB RAM expansion at $4000-$5FFF", 2434},
  {"Enable 8KB RAM expansion at $6000-$7FFF", 2435},
  {"Disable 8KB RAM expansion at $6000-$7FFF", 2436},
  {"Enable 8KB RAM expansion at $8000-$9FFF", 2437},
  {"Disable 8KB RAM expansion at $8000-$9FFF", 2438},
  {"Enable 8KB RAM expansion at $A000-$BFFF", 2439},
  {"Disable 8KB RAM expansion at $A000-$BFFF", 2440},
  {"\
Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel \
64)", 2441},
  {"Disable Professional DOS", 2442},
  {"Specify name of Professional DOS 1571 ROM image", 2443},
  {"Disable SuperCard+", 2444},
  {"Specify name of SuperCard+ ROM image", 2445},
  {"Set parallel cable type (0: none, 1: standard)", 2446},
  {"Specify name of 1571CR DOS ROM image", 2447},
  {"Specify name of 2031 DOS ROM image", 2448},
  {"Specify name of 2040 DOS ROM image", 2449},
  {"Specify name of 3040 DOS ROM image", 2450},
  {"Specify name of 4040 DOS ROM image", 2451},
  {"Specify name of 1001/8050/8250 DOS ROM image", 2452},
  {"Specify name of 1551 DOS ROM image", 2453},
  {"Use <name> as directory for file system device #8", 2454},
  {"Use <name> as directory for file system device #9", 2455},
  {"Use <name> as directory for file system device #10", 2456},
  {"Use <name> as directory for file system device #11", 2457},
  {"Enable on-read support for P00 files on drive 8", 2458},
  {"Disable on-read support for P00 files on drive 8", 2459},
  {"Enable on-read support for P00 files on drive 9", 2460},
  {"Disable on-read support for P00 files on drive 9", 2461},
  {"Enable on-read support for P00 files on drive 10", 2462},
  {"Disable on-read support for P00 files on drive 10", 2463},
  {"Enable on-read support for P00 files on drive 11", 2464},
  {"Disable on-read support for P00 files on drive 11", 2465},
  {"Enable saving of P00 files on drive 8", 2466},
  {"Disable saving of P00 files on drive 8", 2467},
  {"Enable saving of P00 files on drive 9", 2468},
  {"Disable saving of P00 files on drive 9", 2469},
  {"Enable saving of P00 files on drive 10", 2470},
  {"Disable saving of P00 files on drive 10", 2471},
  {"Enable saving of P00 files on drive 11", 2472},
  {"Disable saving of P00 files on drive 11", 2473},
  {"Hide CBM files (only show P00 files) for drive 8", 2474},
  {"Do not hide CBM files (show all files) for drive 8", 2475},
  {"Hide CBM files (only show P00 files) for drive 9", 2476},
  {"Do not hide CBM files (show all files) for drive 9", 2477},
  {"Hide CBM files (only show P00 files) for drive 10", 2478},
  {"Do not hide CBM files (show all files) for drive 10", 2479},
  {"Hide CBM files (only show P00 files) for drive 11", 2480},
  {"Do not hide CBM files (show all files) for drive 11", 2481},
  {"Set bitrate for audio stream in media file", 2482},
  {"Set bitrate for video stream in media file", 2483},
  {"\
Specify PET model to emulate. \
(2001/3008/3016/3032/3032B/4016/4032/4032B/8032/8096/8296/SuperPET)", 2484},
  {"Specify name of Editor ROM image", 2485},
  {"Specify 4K extension ROM name at $9***", 2486},
  {"Specify 4K extension ROM name at $A***", 2487},
  {"Specify 4K extension ROM name at $B***", 2488},
  {"Enable PET8296 4K RAM mapping at $9***", 2489},
  {"Disable PET8296 4K RAM mapping at $9***", 2490},
  {"Enable PET8296 4K RAM mapping at $A***", 2491},
  {"Disable PET8296 4K RAM mapping at $A***", 2492},
  {"Enable SuperPET I/O", 2493},
  {"Disable SuperPET I/O", 2494},
  {"Enable ROM 1 Kernal patches", 2495},
  {"Disable ROM 1 Kernal patches", 2496},
  {"Switch upper/lower case charset", 2497},
  {"Do not switch upper/lower case charset", 2498},
  {"EOI does not blank screen", 2499},
  {"Set SuperPET CPU switch to '6502'", 2500},
  {"Set SuperPET CPU switch to '6809'", 2501},
  {"Set SuperPET CPU switch to 'Prog'", 2502},
  {"Specify 4K to 24K ROM file name at $A000 for 6809", 2503},
  {"Specify 4K to 20K ROM file name at $B000 for 6809", 2504},
  {"Specify 4K to 16K ROM file name at $C000 for 6809", 2505},
  {"Specify 4K to 12K ROM file name at $D000 for 6809", 2506},
  {"Specify 2K or 8K ROM file name at $E000 for 6809", 2507},
  {"Specify 4K ROM file name at $F000 for 6809", 2508},
  {"RGBI colour extension to PET 4032", 2509},
  {"Analog colour extension to PET 4032", 2510},
  {"Colour 0-255", 2511},
  {"Analog colour background on PET 4032", 2512},
  {"PET RAM size (4/8/16/32/96/128)", 2513},
  {"PET I/O size (256/2048)", 2514},
  {"Enable CRTC", 2515},
  {"Disable CRTC", 2516},
  {"Set video size (0: Automatic, 40: 40 Columns, 80: 80 Columns)", 2517},
  {"Enable userport diagnostic pin", 2518},
  {"Disable userport diagnostic pin", 2519},
  {"Specify name of Function low ROM image", 2520},
  {"Specify name of Function high ROM image", 2521},
  {"Specify name of Cartridge 1 low ROM image", 2522},
  {"Specify name of Cartridge 1 high ROM image", 2523},
  {"Specify name of Cartridge 2 low ROM image", 2524},
  {"Specify name of Cartridge 2 high ROM image", 2525},
  {"Specify size of RAM installed in kb (16/32/64)", 2526},
  {"Set saturation of internal calculated palette", 2527},
  {"Set contrast of internal calculated palette", 2528},
  {"Set brightness of internal calculated palette", 2529},
  {"Set gamma of internal calculated palette", 2530},
  {"Set tint of internal calculated palette", 2531},
  {"Set phase for color carrier in odd lines", 2532},
  {"Set phase offset for color carrier in odd lines", 2533},
  {"Amount of horizontal blur for the CRT emulation.", 2534},
  {"Amount of scan line shading for the CRT emulation", 2535},
  {"Set VIC-II model (6569/6569r1/8565/6567/8562/6567r56a/6572)", 2536},
  {"Specify name of printer driver for device #4. (ascii/mps803/nl10/raw)", 2537},
  {"Specify name of printer driver for device #5. (ascii/mps803/nl10/raw)", 2538},
  {"Specify name of printer driver for device #6. (1520/raw)", 2539},
  {"\
Specify name of printer driver for the userport printer. (ascii/nl10/raw)", 2540},
  {"Set device type for device #4 (0: None, 1: Filesystem, 2: Real)", 2541},
  {"Set device type for device #5 (0: None, 1: Filesystem, 2: Real)", 2542},
  {"Set device type for device #6 (0: None, 1: Filesystem, 2: Real)", 2543},
  {"Set device type for device #7 (0: None, 2: Real)", 2544},
  {"Enable the userport printer emulation", 2545},
  {"Disable the userport printer emulation", 2546},
  {"Specify name of output device for device #4", 2547},
  {"Specify name of output device for device #5", 2548},
  {"Specify name of output device for device #6", 2549},
  {"Specify name of output device for the userport printer", 2550},
  {"Specify name of printer text device or dump file", 2551},
  {"Specify printer text output device for printer #4", 2552},
  {"Specify printer text output device for printer #5", 2553},
  {"Specify printer text output device for printer #6", 2554},
  {"Specify printer text output device for userport printer", 2555},
  {"Enable the video cache", 2556},
  {"Disable the video cache", 2557},
  {"Specify name of first RS232 device", 2558},
  {"Specify name of second RS232 device", 2559},
  {"Specify name of third RS232 device", 2560},
  {"Specify name of fourth RS232 device", 2561},
  {"Disable RS232 userport emulation", 2562},
  {"baud", 2563},
  {"Set the baud rate of the RS232 userport emulation.", 2564},
  {"Specify VICE RS232 device for userport", 2565},
  {"Enable IEC device emulation for device #4", 2566},
  {"Disable IEC device emulation for device #4", 2567},
  {"Enable IEC device emulation for device #5", 2568},
  {"Disable IEC device emulation for device #5", 2569},
  {"Enable IEC device emulation for device #6", 2570},
  {"Disable IEC device emulation for device #6", 2571},
  {"Enable IEC device emulation for device #7", 2572},
  {"Disable IEC device emulation for device #7", 2573},
  {"Enable IEC device emulation for device #8", 2574},
  {"Disable IEC device emulation for device #8", 2575},
  {"Enable IEC device emulation for device #9", 2576},
  {"Disable IEC device emulation for device #9", 2577},
  {"Enable IEC device emulation for device #10", 2578},
  {"Disable IEC device emulation for device #10", 2579},
  {"Enable IEC device emulation for device #11", 2580},
  {"Disable IEC device emulation for device #11", 2581},
  {"engine and model", 2582},
  {"amount", 2583},
  {"amount of extra SID chips.", 2584},
  {"0: FastSID 6581, 1: FastSID 8580", 2585},
  {"256: ReSID 6581, 257: ReSID 8580, 258: ReSID 8580 + digiboost", 2586},
  {"260: DTVSID", 2587},
  {"512: Catweasel", 2588},
  {"768: HardSID", 2589},
  {"\
1024: ParSID in par port 1, 1280: ParSID in par port 2, 1536: ParSID in par \
port 3", 2590},
  {"Disable the SID cartridge", 2591},
  {"SID cartridge address (0x8F00/0xE900)", 2592},
  {"SID cartridge address (0xFD40/0xFE80)", 2593},
  {"SID cartridge address (0x9800/0x9C00)", 2594},
  {"SID cartridge clock (0: C64 clock, 1: PET clock)", 2595},
  {"SID cartridge clock (0: C64 clock, 1: PLUS4 clock)", 2596},
  {"SID cartridge clock (0: C64 clock, 1: VIC20 clock)", 2597},
  {"Specify base address for 2nd SID", 2598},
  {"Specify base address for 3rd SID", 2599},
  {"Emulate SID filters", 2600},
  {"Do not emulate SID filters", 2601},
  {"\
reSID sampling method (0: fast, 1: interpolating, 2: resampling, 3: fast \
resampling)", 2602},
  {"percent", 2603},
  {"reSID resampling passband in percentage of total bandwidth (0 - 90)", 2604},
  {"\
reSID filter bias setting, which can be used to adjust DAC bias in \
millivolts.", 2605},
  {"reSID gain in percent (90 - 100)", 2606},
  {"Set the HardSID device for the main SID output", 2607},
  {"Set the HardSID device for the right SID output", 2608},
  {"Enable additional vertical stretching.", 2609},
  {"Disable additional vertical stretching.", 2610},
  {"Set the VDC memory size to 16KB", 2611},
  {"Set the VDC memory size to 64KB", 2612},
  {"Set VDC revision", 2613},
  {"spec", 2614},
  {"\
Specify memory configuration. (none/3k/8k/16k/24k/all) / (0/1/2/3/5) / \
(04/20/40/60/a0)", 2615},
  {"Enable VIC-1112 IEEE488 interface", 2616},
  {"Disable VIC-1112 IEEE488 interface", 2617},
  {"Specify 4/8/16K extension ROM name at $2000", 2618},
  {"Specify 4/8/16K extension ROM name at $4000", 2619},
  {"Specify 4/8/16K extension ROM name at $6000", 2620},
  {"Specify 4/8K extension ROM name at $A000", 2621},
  {"Specify 4K extension ROM name at $B000", 2622},
  {"Specify generic extension ROM name", 2623},
  {"Specify Mega-Cart extension ROM name", 2624},
  {"Specify Final Expansion extension ROM name", 2625},
  {"Specify Vic Flash Plugin extension ROM name", 2626},
  {"Disable Final Expansion write back to ROM file", 2627},
  {"Set Mega-Cart NvRAM filename", 2628},
  {"Disable Mega-Cart NvRAM writeback", 2629},
  {"Disable Vic Flash Plugin write back to ROM file", 2630},
  {"Set border display mode (0: normal, 1: full, 2: debug)", 2631},
  {"Enable sprite-background collision registers", 2632},
  {"Disable sprite-background collision registers", 2633},
  {"Enable sprite-sprite collision registers", 2634},
  {"Disable sprite-sprite collision registers", 2635},
  {"Enable VSP bug emulation", 2636},
  {"Disable VSP bug emulation", 2637},
  {"Use new luminances", 2638},
  {"Use old luminances", 2639},
  {"Enable the possibility of hardware scaling", 2640},
  {"Disable the possibility of hardware scaling", 2641},
  {"Enable double size", 2642},
  {"Disable double size", 2643},
  {"Enable double scan", 2644},
  {"Disable double scan", 2645},
  {"Enable audio leak emulation", 2646},
  {"Disable audio leak emulation", 2647},
  {"Enable hardware scaling", 2648},
  {"Disable hardware scaling", 2649},
  {"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)", 2650},
  {"Use an internal calculated palette", 2651},
  {"Use an external palette (file)", 2652},
  {"Specify name of file of external palette", 2653},
  {"Select fullscreen device", 2654},
  {"Seconds", 2655},
  {"Select fullscreen mode", 2656},
  {"Specify RS232 device this ACIA should work on", 2657},
  {"\
Set device type for device #8 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block \
device)", 2658},
  {"\
Set device type for device #9 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block \
device)", 2659},
  {"\
Set device type for device #10 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block \
device)", 2660},
  {"\
Set device type for device #11 (0: None, 1: Filesystem, 2: OpenCBM, 3: Block \
device)", 2661},
  {"Attach disk image for drive #8 read only", 2662},
  {"Attach disk image for drive #8 read write (if possible)", 2663},
  {"Attach disk image for drive #9 read only", 2664},
  {"Attach disk image for drive #9 read write (if possible)", 2665},
  {"Attach disk image for drive #10 read only", 2666},
  {"Attach disk image for drive #10 read write (if possible)", 2667},
  {"Attach disk image for drive #11 read only", 2668},
  {"Attach disk image for drive #11 read write (if possible)", 2669},
  {"Enable automatic Datasette-Reset", 2670},
  {"Disable automatic Datasette-Reset", 2671},
  {"Set delay in cycles for a zero in the tap", 2672},
  {"Set number of cycles added to each gap in the tap", 2673},
  {"Set maximum random number of cycles added to each gap in the tap", 2674},
  {"Trace the main CPU", 2675},
  {"Do not trace the main CPU", 2676},
  {"Trace the drive0 CPU", 2677},
  {"Do not trace the drive0 CPU", 2678},
  {"Trace the drive1 CPU", 2679},
  {"Do not trace the drive1 CPU", 2680},
  {"Trace the drive2 CPU", 2681},
  {"Do not trace the drive2 CPU", 2682},
  {"Trace the drive3 CPU", 2683},
  {"Do not trace the drive3 CPU", 2684},
  {"Trace mode (0=normal 1=small 2=history)", 2685},
  {"Set the amount of automatic playback frames", 2686},
  {"frames", 2687},
  {"Playback recorded events", 2688},
  {"Set event snapshot directory", 2689},
  {"Set event start snapshot", 2690},
  {"Set event end snapshot", 2691},
  {"\
Set event start mode (0: file save, 1: file load, 2: reset, 3: playback)", 2692},
  {"Enable including disk images", 2693},
  {"Disable including disk images", 2694},
  {"Execute monitor commands from file", 2695},
  {"Write monitor output also to file", 2696},
  {"Set an initial breakpoint for the monitor", 2697},
  {"Keep the monitor open", 2698},
  {"Do not keep the monitor open", 2699},
  {"Enable remote monitor", 2700},
  {"Disable remote monitor", 2701},
  {"The local address the remote monitor should bind to", 2702},
  {"Specify name of the flip list file image", 2703},
  {"Show a list of the available options and exit normally", 2704},
  {"\
Show a list of the available compile-time options and their configuration.", 2705},
  {"Console mode (for music playback)", 2706},
  {"Allow production of core dumps", 2707},
  {"Do not produce core dumps", 2708},
  {"Don't call exception handler", 2709},
  {"Call exception handler (default)", 2710},
  {"Specify config file", 2711},
  {"Specify number of cycles to run before quitting with an error.", 2712},
  {"Attach and autostart tape/disk image <name>", 2713},
  {"Attach and autoload tape/disk image <name>", 2714},
  {"Attach <name> as a tape image", 2715},
  {"Attach <name> as a disk image in drive #8", 2716},
  {"Attach <name> as a disk image in drive #9", 2717},
  {"Attach <name> as a disk image in drive #10", 2718},
  {"Attach <name> as a disk image in drive #11", 2719},
  {"Set additional keyboard buffer delay (0: use default)", 2720},
  {"Specify log file name", 2721},
  {"Enable verbose log output.", 2722},
  {"Disable mouse grab", 2723},
  {"Select the joystick port the mouse is attached to. (1/2)", 2724},
  {"\
Select the mouse type (0 = 1351, 1 = NEOS, 2 = Amiga, 3 = Paddles, 4 = \
CX-22, 5 = ST, 6 = Smart, 7 = Micromys 8 = Koalapad)", 2725},
  {"Enable saving of smart mouse RTC data when changed.", 2726},
  {"Disable saving of smart mouse RTC data when changed.", 2727},
  {"Enable PS/2 mouse on userport", 2728},
  {"Disable PS/2 mouse on userport", 2729},
  {"Set the value for the very first RAM address after powerup", 2730},
  {"num of bytes", 2731},
  {"Length of memory block initialized with the same value", 2732},
  {"Length of memory block initialized with the same pattern", 2733},
  {"load the given romset file", 2734},
  {"load the given romset archive", 2735},
  {"Item number", 2736},
  {"select the given item from the current romset archive", 2737},
  {"Disable sound playback", 2738},
  {"Set sound sample rate to <value> Hz", 2739},
  {"Set sound buffer size to <value> msec", 2740},
  {"\
Set sound fragment size (0: very small, 1: small, 2: medium, 3: large, 4: \
very large)", 2741},
  {"Specify sound driver", 2742},
  {"args", 2743},
  {"Specify initialization parameters for sound driver", 2744},
  {"Specify recording sound driver", 2745},
  {"Specify initialization parameters for recording sound driver", 2746},
  {"sync", 2747},
  {"Set sound speed adjustment (0: flexible, 1: adjusting, 2: exact)", 2748},
  {"output mode", 2749},
  {"\
Sound output mode: (0: system decides mono/stereo, 1: always mono, 2: always \
stereo)", 2750},
  {"\
Specify the pause interval when audio underflows (clicks) happen. 0 means no \
pause is done.", 2751},
  {"Specify the sound volume", 2752},
  {"Define search path to locate system files", 2753},
  {"Enable general mechanisms for fast disk/tape emulation", 2754},
  {"Disable general mechanisms for fast disk/tape emulation", 2755},
  {"Limit emulation speed to specified value", 2756},
  {"Update every <value> frames (`0' for automatic)", 2757},
  {"Disable warp mode", 2758},
  {"iso language code", 2759},
  {"Specify the iso code of the language", 2760},
  {"Specify name of PLUS256K image", 2761},
  {"Specify name of PLUS60K image", 2762},
  {"Base address of the PLUS60K expansion. (0xD040/0xD100)", 2763},
  {"Specify name of 256K image", 2764},
  {"Base address of the 256K expansion. (0xDE00/0xDE80/0xDF00/0xDF80)", 2765},
  {"\
Set the 'memory expansion hack' device (0: None, 1: C64 256K, 2: +60K, 3: \
+256K)", 2766},
  {"\
Set the 'memory expansion hack' device (0: None, 1: CSORY 256K, 2: HANNES \
256K, 3: HANNES 1024K, 4: HANNES 4096K)", 2767},
  {"Attach raw 16kB Super Explode V5 cartridge image", 2768},
  {"Attach raw 64kB Super Games cartridge image", 2769},
  {"Attach raw Silverrock 128 cartridge image", 2770},
  {"Attach raw 16kB Simons Basic cartridge image", 2771},
  {"Specify DTV Revision (2: DTV2, 3: DTV3)", 2772},
  {"Enable DTV blitter logs.", 2773},
  {"Disable DTV blitter logs.", 2774},
  {"Enable DTV DMA logs.", 2775},
  {"Disable DTV DMA logs.", 2776},
  {"Specify name of C64DTV ROM image", 2777},
  {"Disable writes to C64DTV ROM image", 2778},
  {"Enable DTV flash chip logs.", 2779},
  {"Disable DTV flash chip logs.", 2780},
  {"Use <name> as directory for flash file system device", 2781},
  {"Disable true hardware flash file system", 2782},
  {"Disable MIDI emulation", 2783},
  {"\
MIDI interface type (0: Sequential, 1: Passport, 2: DATEL, 3: Namesoft, 4: \
Maplin)", 2784},
  {"Disable the digiblaster add-on", 2785},
  {"Disable the v364 speech add-on", 2786},
  {"Attach Speech ROM image", 2787},
  {"Disable the SFX Sound Expander cartridge", 2788},
  {"Set YM chip type (3526 / 3812)", 2789},
  {"Disable the SFX Sound Sampler cartridge", 2790},
  {"Disable lightpen emulation", 2791},
  {"\
Set lightpen type. (0: Pen with button Up, 1: Pen with button Left, 2: Datel \
Pen, 3: Magnum Light Phaser, 4: Stack Light Rifel, 5: Inkwell Pen)", 2792},
  {"Enable EasyFlash jumper", 2793},
  {"Disable EasyFlash jumper", 2794},
  {"Enable writing to EasyFlash .crt image", 2795},
  {"Disable writing to EasyFlash .crt image", 2796},
  {"Enable EasyFlash .crt image optimize on write", 2797},
  {"Disable the DigiMAX cartridge", 2798},
  {"Base address of the DigiMAX cartridge", 2799},
  {"Enable the DS12C887 RTC cartridge", 2800},
  {"Disable the DS12C887 RTC cartridge", 2801},
  {"Set the RTC oscillator to 'halted'", 2802},
  {"Set the RTC oscillator to 'running'", 2803},
  {"Base address of the DS12C887 RTC cartridge", 2804},
  {"Enable saving of the DS12C887 RTC data when changed.", 2805},
  {"Disable saving of the DS12C887 RTC data when changed.", 2806},
  {"hostname", 2807},
  {"port", 2808},
  {"Set the netplay server hostname", 2809},
  {"Set the netplay binding address", 2810},
  {"Set the netplay port", 2811},
  {"\
Set the netplay control elements (keyboard, joystick1, joystick2, devices \
and resources), each item takes a value (0: None, 1: Server, 2: Client, 3: \
Both)", 2812},
  {"Size of the SIMM RAM (0/1/4/8/16 MB)", 2813},
  {"Turn on Jiffy switch", 2814},
  {"Turn off Jiffy switch", 2815},
  {"Turn on Speed switch", 2816},
  {"Turn off Speed switch", 2817},
  {"Enable HiRes Emulation Board", 2818},
  {"Disable HiRes Emulation Board", 2819},
  {"Set raw drive device name", 2820},
};

int _msg_tbl_length = 2820;
